#include "M24C32.h"


uint8_t writedata[1] = {0xAA};
uint8_t Readdata[1] = {0,};  






void I2c_Status_Check(I2C_HandleTypeDef* hi2cx,HAL_StatusTypeDef status){
    if(HAL_OK == status){
        printf("HAL_OK\n");
    }
    else if(HAL_ERROR == status){
        printf("HAL_ERROR\n");
    }else if(HAL_BUSY == status){
        printf("HAL_ERROR\n");
    }else if(HAL_TIMEOUT == status){
        printf("HAL_ERROR\n");
    }  
}



void M24C32_Data_Write(I2C_HandleTypeDef* hi2cx,uint8_t* data,uint16_t address,uint8_t size){
    HAL_StatusTypeDef status = HAL_ERROR;
    for(uint8_t i = 0; i < size; i++){
        status = HAL_I2C_Mem_Write(hi2cx,0xA0,address + i, I2C_MEMADD_SIZE_16BIT, &data[i],1, 2000);
        HAL_Delay(5);
        if(status > HAL_OK)
            printf("EEPROM SAVE ERROR!!! \n");
    }
   // I2c_Status_Check(status);
}
uint8_t M24C32_Data_Read(I2C_HandleTypeDef* hi2cx,uint16_t address){
    uint8_t data[1] = {0};
    HAL_StatusTypeDef status = HAL_ERROR;
    status = HAL_I2C_Mem_Read(hi2cx,0xA1, address,I2C_MEMADD_SIZE_16BIT, &data[0],1, 2000);
  //  I2c_Status_Check(status);
//    printf("Readdata[0] : %02x\n",data);
    return data[0];
}