ADC 배열 순서 수정

Debug/STM32F103_ATTEN_PLL_Zig.hex

@@ -1001,7 +1001,7 @@
 :107E680010030A930A9BAB69012643F08003AB61B8
 :107E7800AB69022703F080030B930B9BAB694FF0B0
 :107E88000C0B43F00403AB61AB694FF00E0903F030
-:107E980004030C930C9BAB694FF0050843F00803EF
+:107E980004030C930C9BAB694FF0070843F00803ED
 :107EA800AB61AB694FF0030A03F008030D930D9B18
 :107EB800AB6943F02003AB61AB6903F020030E9379
 :107EC8000E9BAB6943F48073AB61AB6903F48073B9
@@ -1030,9 +1030,9 @@
 :10803800A7FA10A9284610961197FDF7A1FA10A9DA
 :108048002846CDF844A01097FDF79AFACDF840A03D
 :108058004FF0040A10A92846CDF844A0FDF790FA7D
-:1080680010A92846CDF840A0CDF84480FDF788FA3D
-:10807800CDF840804FF0060810A92846CDF8448076
-:10808800FDF77EFACDF840804FF0070810A9284682
+:10806800CDF840A04FF0050A10A92846CDF844A045
+:10807800FDF786FACDF840A04FF0060A10A9284669
+:10808800CDF844A0FDF77CFA10A92846CDF840A009
 :10809800CDF84480FDF774FACDF840804FF0080819
 :1080A80010A92846CDF84480FDF76AFACDF840803B
 :1080B8004FF0090810A92846CDF84480FDF760FA6A
@@ -1092,8 +1092,8 @@
 :108418000023C9F80030DFF8C8A0DFF8C890DFF8FB
 :10842800B4B0DAF80830002B03DDD9F80030642B3B
 :1084380023D840F6C413264A116899427FF67FAFC5
-:108448000023DFF87890DFF8A0C059F8230003EB89
-:108458000C0102334FEA102E0E2B81F822E081F82E
+:108448000023DFF87890DFF8A0C059F8130003EB99
+:108458000C0102334FEA102E1C2B81F822E081F820
 :108468002300F2D10023136069E74FF4806140468E
 :10847800FDF726FF0128BFD19AE7584600F0DEFA3B
 :10848800CFE700BFAFF30080A0B483EA000000008C
@@ -1151,7 +1151,7 @@
 :1087C80008030393039B0F230493FDF78DFCFF23FA
 :1087D80004A9154804930594FDF786FC134804A9D9
 :1087E80004940594FDF780FC8022114C114BE26043
-:1087F8004FF4807222614FF480622360626100232B
+:1087F8004FF4007222614FF400622360626100232B
 :10880800202220466360A360A261E361FDF77EF940
 :1088180008B1FFF76BFE2C62656209B030BD00BF7E
 :10882800002401400010014000080140000C0140F4

Debug/STM32F103_ATTEN_PLL_Zig.list

@@ -23,23 +23,23 @@ Idx Name          Size      VMA       LMA       File off  Algn
                   ALLOC
   9 .ARM.attributes 00000029  00000000  00000000  00010404  2**0
                   CONTENTS, READONLY
- 10 .debug_info   0002a177  00000000  00000000  0001042d  2**0
+ 10 .debug_info   0002a2c4  00000000  00000000  0001042d  2**0
                   CONTENTS, READONLY, DEBUGGING
- 11 .debug_abbrev 000050b6  00000000  00000000  0003a5a4  2**0
+ 11 .debug_abbrev 000050e8  00000000  00000000  0003a6f1  2**0
                   CONTENTS, READONLY, DEBUGGING
- 12 .debug_loc    00009d35  00000000  00000000  0003f65a  2**0
+ 12 .debug_loc    00009d22  00000000  00000000  0003f7d9  2**0
                   CONTENTS, READONLY, DEBUGGING
- 13 .debug_aranges 00000e00  00000000  00000000  00049390  2**3
+ 13 .debug_aranges 00000e00  00000000  00000000  00049500  2**3
                   CONTENTS, READONLY, DEBUGGING
- 14 .debug_ranges 00001238  00000000  00000000  0004a190  2**3
+ 14 .debug_ranges 00001238  00000000  00000000  0004a300  2**3
                   CONTENTS, READONLY, DEBUGGING
- 15 .debug_line   00009c8a  00000000  00000000  0004b3c8  2**0
+ 15 .debug_line   00009d24  00000000  00000000  0004b538  2**0
                   CONTENTS, READONLY, DEBUGGING
- 16 .debug_str    00005746  00000000  00000000  00055052  2**0
+ 16 .debug_str    00005746  00000000  00000000  0005525c  2**0
                   CONTENTS, READONLY, DEBUGGING
- 17 .comment      0000007c  00000000  00000000  0005a798  2**0
+ 17 .comment      0000007c  00000000  00000000  0005a9a2  2**0
                   CONTENTS, READONLY
- 18 .debug_frame  000037a8  00000000  00000000  0005a814  2**2
+ 18 .debug_frame  000037a8  00000000  00000000  0005aa20  2**2
                   CONTENTS, READONLY, DEBUGGING
 
 Disassembly of section .text:
@@ -8760,8 +8760,8 @@ static void MX_GPIO_Init(void)
  8007e9c:	9b0c      	ldr	r3, [sp, #48]	; 0x30
   __HAL_RCC_GPIOB_CLK_ENABLE();
  8007e9e:	69ab      	ldr	r3, [r5, #24]
-  sConfig.SamplingTime = ADC_SAMPLETIME_55CYCLES_5;
- 8007ea0:	f04f 0805 	mov.w	r8, #5
+  sConfig.SamplingTime = ADC_SAMPLETIME_239CYCLES_5;
+ 8007ea0:	f04f 0807 	mov.w	r8, #7
   __HAL_RCC_GPIOB_CLK_ENABLE();
  8007ea4:	f043 0308 	orr.w	r3, r3, #8
  8007ea8:	61ab      	str	r3, [r5, #24]
@@ -9063,7 +9063,7 @@ static void MX_GPIO_Init(void)
   if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
  800802a:	a910      	add	r1, sp, #64	; 0x40
  800802c:	4628      	mov	r0, r5
-  sConfig.SamplingTime = ADC_SAMPLETIME_55CYCLES_5;
+  sConfig.SamplingTime = ADC_SAMPLETIME_239CYCLES_5;
  800802e:	f8cd 8048 	str.w	r8, [sp, #72]	; 0x48
   sConfig.Channel = ADC_CHANNEL_0;
  8008032:	9410      	str	r4, [sp, #64]	; 0x40
@@ -9100,33 +9100,33 @@ static void MX_GPIO_Init(void)
  8008060:	f8cd a044 	str.w	sl, [sp, #68]	; 0x44
   if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
  8008064:	f7fd fa90 	bl	8005588 <HAL_ADC_ConfigChannel>
-  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
- 8008068:	a910      	add	r1, sp, #64	; 0x40
- 800806a:	4628      	mov	r0, r5
   sConfig.Channel = ADC_CHANNEL_4;
- 800806c:	f8cd a040 	str.w	sl, [sp, #64]	; 0x40
+ 8008068:	f8cd a040 	str.w	sl, [sp, #64]	; 0x40
+  sConfig.Rank = ADC_REGULAR_RANK_5;
+ 800806c:	f04f 0a05 	mov.w	sl, #5
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+ 8008070:	a910      	add	r1, sp, #64	; 0x40
+ 8008072:	4628      	mov	r0, r5
   sConfig.Rank = ADC_REGULAR_RANK_5;
- 8008070:	f8cd 8044 	str.w	r8, [sp, #68]	; 0x44
+ 8008074:	f8cd a044 	str.w	sl, [sp, #68]	; 0x44
   if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
- 8008074:	f7fd fa88 	bl	8005588 <HAL_ADC_ConfigChannel>
+ 8008078:	f7fd fa86 	bl	8005588 <HAL_ADC_ConfigChannel>
   sConfig.Channel = ADC_CHANNEL_5;
- 8008078:	f8cd 8040 	str.w	r8, [sp, #64]	; 0x40
+ 800807c:	f8cd a040 	str.w	sl, [sp, #64]	; 0x40
   sConfig.Rank = ADC_REGULAR_RANK_6;
- 800807c:	f04f 0806 	mov.w	r8, #6
+ 8008080:	f04f 0a06 	mov.w	sl, #6
   if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
- 8008080:	a910      	add	r1, sp, #64	; 0x40
- 8008082:	4628      	mov	r0, r5
+ 8008084:	a910      	add	r1, sp, #64	; 0x40
+ 8008086:	4628      	mov	r0, r5
   sConfig.Rank = ADC_REGULAR_RANK_6;
- 8008084:	f8cd 8044 	str.w	r8, [sp, #68]	; 0x44
+ 8008088:	f8cd a044 	str.w	sl, [sp, #68]	; 0x44
   if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
- 8008088:	f7fd fa7e 	bl	8005588 <HAL_ADC_ConfigChannel>
-  sConfig.Channel = ADC_CHANNEL_6;
- 800808c:	f8cd 8040 	str.w	r8, [sp, #64]	; 0x40
-  sConfig.Rank = ADC_REGULAR_RANK_7;
- 8008090:	f04f 0807 	mov.w	r8, #7
+ 800808c:	f7fd fa7c 	bl	8005588 <HAL_ADC_ConfigChannel>
   if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
- 8008094:	a910      	add	r1, sp, #64	; 0x40
- 8008096:	4628      	mov	r0, r5
+ 8008090:	a910      	add	r1, sp, #64	; 0x40
+ 8008092:	4628      	mov	r0, r5
+  sConfig.Channel = ADC_CHANNEL_6;
+ 8008094:	f8cd a040 	str.w	sl, [sp, #64]	; 0x40
   sConfig.Rank = ADC_REGULAR_RANK_7;
  8008098:	f8cd 8044 	str.w	r8, [sp, #68]	; 0x44
   if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
@@ -9457,7 +9457,7 @@ static void MX_GPIO_Init(void)
  8008330:	e9d7 6700 	ldrd	r6, r7, [r7]
     ATTEN_PLL_PATH_Initialize();
  8008334:	f7ff fcf6 	bl	8007d24 <ATTEN_PLL_PATH_Initialize>
-  HAL_ADC_Start_DMA(&hadc1, (uint32_t*)ADCvalue, 14);  
+    HAL_ADC_Start_DMA(&hadc1, (uint32_t*)ADCvalue, 14);
  8008338:	220e      	movs	r2, #14
  800833a:	4962      	ldr	r1, [pc, #392]	; (80084c4 <main+0x69c>)
  800833c:	4862      	ldr	r0, [pc, #392]	; (80084c8 <main+0x6a0>)
@@ -9568,20 +9568,20 @@ static void MX_GPIO_Init(void)
  8008442:	4299      	cmp	r1, r3
  8008444:	f67f af7f 	bls.w	8008346 <main+0x51e>
  8008448:	2300      	movs	r3, #0
-            Prev_data[INDEX_DET_1_8G_DL_IN_H + i]     = (uint16_t)((ADCvalue[i] & 0xFF00) >> 8);
+            Prev_data[INDEX_DET_1_8G_DL_IN_H + i*2]     = (uint16_t)((ADCvalue[i] & 0xFF00) >> 8);
  800844a:	f8df 9078 	ldr.w	r9, [pc, #120]	; 80084c4 <main+0x69c>
  800844e:	f8df c0a0 	ldr.w	ip, [pc, #160]	; 80084f0 <main+0x6c8>
- 8008452:	f859 0023 	ldr.w	r0, [r9, r3, lsl #2]
+ 8008452:	f859 0013 	ldr.w	r0, [r9, r3, lsl #1]
  8008456:	eb03 010c 	add.w	r1, r3, ip
  800845a:	3302      	adds	r3, #2
  800845c:	ea4f 2e10 	mov.w	lr, r0, lsr #8
-        for(uint8_t i = 0; i< ADC_EA; i += 2 ){
- 8008460:	2b0e      	cmp	r3, #14
-            Prev_data[INDEX_DET_1_8G_DL_IN_H + i]     = (uint16_t)((ADCvalue[i] & 0xFF00) >> 8);
+        for(uint8_t i = 0; i< ADC_EA; i++ ){
+ 8008460:	2b1c      	cmp	r3, #28
+            Prev_data[INDEX_DET_1_8G_DL_IN_H + i*2]     = (uint16_t)((ADCvalue[i] & 0xFF00) >> 8);
  8008462:	f881 e022 	strb.w	lr, [r1, #34]	; 0x22
-            Prev_data[INDEX_DET_1_8G_DL_IN_L + i]     = (uint16_t)(ADCvalue[i] & 0x00FF);
+            Prev_data[INDEX_DET_1_8G_DL_IN_L + i*2]     = (uint16_t)(ADCvalue[i] & 0x00FF);
  8008466:	f881 0023 	strb.w	r0, [r1, #35]	; 0x23
-        for(uint8_t i = 0; i< ADC_EA; i += 2 ){
+        for(uint8_t i = 0; i< ADC_EA; i++ ){
  800846a:	d1f2      	bne.n	8008452 <main+0x62a>
         AdcTimerCnt = 0;
  800846c:	2300      	movs	r3, #0
@@ -10142,14 +10142,14 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
  80087f4:	4b11      	ldr	r3, [pc, #68]	; (800883c <HAL_ADC_MspInit+0xdc>)
     hdma_adc1.Init.MemInc = DMA_MINC_ENABLE;
  80087f6:	60e2      	str	r2, [r4, #12]
-    hdma_adc1.Init.PeriphDataAlignment = DMA_PDATAALIGN_HALFWORD;
- 80087f8:	f44f 7280 	mov.w	r2, #256	; 0x100
+    hdma_adc1.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD;
+ 80087f8:	f44f 7200 	mov.w	r2, #512	; 0x200
  80087fc:	6122      	str	r2, [r4, #16]
-    hdma_adc1.Init.MemDataAlignment = DMA_MDATAALIGN_HALFWORD;
- 80087fe:	f44f 6280 	mov.w	r2, #1024	; 0x400
+    hdma_adc1.Init.MemDataAlignment = DMA_MDATAALIGN_WORD;
+ 80087fe:	f44f 6200 	mov.w	r2, #2048	; 0x800
     hdma_adc1.Instance = DMA1_Channel1;
  8008802:	6023      	str	r3, [r4, #0]
-    hdma_adc1.Init.MemDataAlignment = DMA_MDATAALIGN_HALFWORD;
+    hdma_adc1.Init.MemDataAlignment = DMA_MDATAALIGN_WORD;
  8008804:	6162      	str	r2, [r4, #20]
     hdma_adc1.Init.Direction = DMA_PERIPH_TO_MEMORY;
  8008806:	2300      	movs	r3, #0

Debug/STM32F103_ATTEN_PLL_Zig.map

@@ -804,9 +804,9 @@ Discarded input sections
                 0x00000000       0x54 Src\flash.o
  .text.Flash_write
                 0x00000000       0x54 Src\flash.o
- .bss.EraseInitStruct.7452
+ .bss.EraseInitStruct.7453
                 0x00000000       0x10 Src\flash.o
- .bss.PAGEError.7453
+ .bss.PAGEError.7454
                 0x00000000        0x4 Src\flash.o
  .bss.flashinit
                 0x00000000        0x1 Src\flash.o
@@ -825,6 +825,10 @@ Discarded input sections
  .bss           0x00000000        0x0 Src\includes.o
  .text.Power_ON_OFF_Initialize
                 0x00000000       0x98 Src\includes.o
+ .data.Bluecell_Prot_IndexStr
+                0x00000000      0x128 Src\includes.o
+ .rodata.str1.1
+                0x00000000      0x5fd Src\includes.o
  .text          0x00000000        0x0 Src\main.o
  .data          0x00000000        0x0 Src\main.o
  .bss           0x00000000        0x0 Src\main.o
@@ -2190,9 +2194,9 @@ LOAD c:/program files (x86)/atollic/truestudio for stm32 9.3.0/armtools/bin/../l
  *(.bss)
  .bss           0x20000408       0x1c c:/program files (x86)/atollic/truestudio for stm32 9.3.0/armtools/bin/../lib/gcc/arm-atollic-eabi/6.3.1/armv7-m/crtbegin.o
  *(.bss*)
- .bss.EraseInitStruct.7458
+ .bss.EraseInitStruct.7459
                 0x20000424       0x10 Src\flash.o
- .bss.PAGEError.7459
+ .bss.PAGEError.7460
                 0x20000434        0x4 Src\flash.o
  .bss.AdcTimerCnt
                 0x20000438        0x4 Src\main.o
@@ -2205,7 +2209,7 @@ LOAD c:/program files (x86)/atollic/truestudio for stm32 9.3.0/armtools/bin/../l
                 0x20000440                UartRxTimerCnt
  .bss.heap_end.5887
                 0x20000444        0x4 Src\syscalls.o
- .bss.cnt.7439  0x20000448        0x4 Src\uart.o
+ .bss.cnt.7440  0x20000448        0x4 Src\uart.o
  .bss.Ack_Buf   0x2000044c        0x6 Src\zig_operate.o
  *fill*         0x20000452        0x2 
  .bss.__malloc_free_list
@@ -2437,7 +2441,7 @@ LOAD c:/program files (x86)/atollic/truestudio for stm32 9.3.0/armtools/bin/../l
                 0x00000ec4       0x1d c:/program files (x86)/atollic/truestudio for stm32 9.3.0/armtools/bin/../lib/gcc/arm-atollic-eabi/6.3.1/armv7-m/crtn.o
 OUTPUT(STM32F103_ATTEN_PLL_Zig.elf elf32-littlearm)
 
-.debug_info     0x00000000    0x2a177
+.debug_info     0x00000000    0x2a2c4
  .debug_info    0x00000000     0x102e Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal.o
  .debug_info    0x0000102e     0x16a1 Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_adc.o
  .debug_info    0x000026cf     0x138b Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_adc_ex.o
@@ -2451,24 +2455,24 @@ OUTPUT(STM32F103_ATTEN_PLL_Zig.elf elf32-littlearm)
  .debug_info    0x0000b012     0x3bb9 Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_tim.o
  .debug_info    0x0000ebcb     0x1989 Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_tim_ex.o
  .debug_info    0x00010554     0x1e46 Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_uart.o
- .debug_info    0x0001239a     0x15bc Src\AD5318.o
- .debug_info    0x00013956     0x16e3 Src\BDA4601.o
- .debug_info    0x00015039     0x1562 Src\CRC16.o
- .debug_info    0x0001659b     0x18c5 Src\PE43711.o
- .debug_info    0x00017e60     0x1e4c Src\adf4153.o
- .debug_info    0x00019cac     0x19a1 Src\flash.o
- .debug_info    0x0001b64d     0x185c Src\includes.o
- .debug_info    0x0001cea9     0x2d62 Src\main.o
- .debug_info    0x0001fc0b     0x1976 Src\pll_4113.o
- .debug_info    0x00021581     0x1f9c Src\stm32f1xx_hal_msp.o
- .debug_info    0x0002351d     0x17e9 Src\stm32f1xx_it.o
- .debug_info    0x00024d06      0xfe1 Src\syscalls.o
- .debug_info    0x00025ce7      0xc4d Src\system_stm32f1xx.o
- .debug_info    0x00026934     0x1731 Src\uart.o
- .debug_info    0x00028065     0x20a1 Src\zig_operate.o
- .debug_info    0x0002a106       0x71 startup\startup_stm32f103xe.o
+ .debug_info    0x0001239a     0x15d8 Src\AD5318.o
+ .debug_info    0x00013972     0x16ff Src\BDA4601.o
+ .debug_info    0x00015071     0x157e Src\CRC16.o
+ .debug_info    0x000165ef     0x18e1 Src\PE43711.o
+ .debug_info    0x00017ed0     0x1e68 Src\adf4153.o
+ .debug_info    0x00019d38     0x19bd Src\flash.o
+ .debug_info    0x0001b6f5     0x185d Src\includes.o
+ .debug_info    0x0001cf52     0x2d7a Src\main.o
+ .debug_info    0x0001fccc     0x1992 Src\pll_4113.o
+ .debug_info    0x0002165e     0x1fb8 Src\stm32f1xx_hal_msp.o
+ .debug_info    0x00023616     0x1805 Src\stm32f1xx_it.o
+ .debug_info    0x00024e1b      0xfe1 Src\syscalls.o
+ .debug_info    0x00025dfc      0xc4d Src\system_stm32f1xx.o
+ .debug_info    0x00026a49     0x174d Src\uart.o
+ .debug_info    0x00028196     0x20bd Src\zig_operate.o
+ .debug_info    0x0002a253       0x71 startup\startup_stm32f103xe.o
 
-.debug_abbrev   0x00000000     0x50b6
+.debug_abbrev   0x00000000     0x50e8
  .debug_abbrev  0x00000000      0x315 Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal.o
  .debug_abbrev  0x00000315      0x2fb Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_adc.o
  .debug_abbrev  0x00000610      0x296 Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_adc_ex.o
@@ -2482,24 +2486,24 @@ OUTPUT(STM32F103_ATTEN_PLL_Zig.elf elf32-littlearm)
  .debug_abbrev  0x00001dfe      0x3bb Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_tim.o
  .debug_abbrev  0x000021b9      0x30d Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_tim_ex.o
  .debug_abbrev  0x000024c6      0x364 Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_uart.o
- .debug_abbrev  0x0000282a      0x21c Src\AD5318.o
- .debug_abbrev  0x00002a46      0x256 Src\BDA4601.o
- .debug_abbrev  0x00002c9c      0x23c Src\CRC16.o
- .debug_abbrev  0x00002ed8      0x288 Src\PE43711.o
- .debug_abbrev  0x00003160      0x393 Src\adf4153.o
- .debug_abbrev  0x000034f3      0x2fa Src\flash.o
- .debug_abbrev  0x000037ed      0x242 Src\includes.o
- .debug_abbrev  0x00003a2f      0x39a Src\main.o
- .debug_abbrev  0x00003dc9      0x2b5 Src\pll_4113.o
- .debug_abbrev  0x0000407e      0x2d6 Src\stm32f1xx_hal_msp.o
- .debug_abbrev  0x00004354      0x256 Src\stm32f1xx_it.o
- .debug_abbrev  0x000045aa      0x2d9 Src\syscalls.o
- .debug_abbrev  0x00004883      0x1eb Src\system_stm32f1xx.o
- .debug_abbrev  0x00004a6e      0x2d6 Src\uart.o
- .debug_abbrev  0x00004d44      0x360 Src\zig_operate.o
- .debug_abbrev  0x000050a4       0x12 startup\startup_stm32f103xe.o
+ .debug_abbrev  0x0000282a      0x221 Src\AD5318.o
+ .debug_abbrev  0x00002a4b      0x25b Src\BDA4601.o
+ .debug_abbrev  0x00002ca6      0x241 Src\CRC16.o
+ .debug_abbrev  0x00002ee7      0x28d Src\PE43711.o
+ .debug_abbrev  0x00003174      0x398 Src\adf4153.o
+ .debug_abbrev  0x0000350c      0x2ff Src\flash.o
+ .debug_abbrev  0x0000380b      0x23a Src\includes.o
+ .debug_abbrev  0x00003a45      0x39d Src\main.o
+ .debug_abbrev  0x00003de2      0x2ba Src\pll_4113.o
+ .debug_abbrev  0x0000409c      0x2db Src\stm32f1xx_hal_msp.o
+ .debug_abbrev  0x00004377      0x25b Src\stm32f1xx_it.o
+ .debug_abbrev  0x000045d2      0x2d9 Src\syscalls.o
+ .debug_abbrev  0x000048ab      0x1eb Src\system_stm32f1xx.o
+ .debug_abbrev  0x00004a96      0x2db Src\uart.o
+ .debug_abbrev  0x00004d71      0x365 Src\zig_operate.o
+ .debug_abbrev  0x000050d6       0x12 startup\startup_stm32f103xe.o
 
-.debug_loc      0x00000000     0x9d35
+.debug_loc      0x00000000     0x9d22
  .debug_loc     0x00000000      0x11b Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal.o
  .debug_loc     0x0000011b      0x87e Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_adc.o
  .debug_loc     0x00000999      0x769 Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_adc_ex.o
@@ -2520,13 +2524,13 @@ OUTPUT(STM32F103_ATTEN_PLL_Zig.elf elf32-littlearm)
  .debug_loc     0x000082f0      0x764 Src\adf4153.o
  .debug_loc     0x00008a54      0x2a2 Src\flash.o
  .debug_loc     0x00008cf6      0x160 Src\includes.o
- .debug_loc     0x00008e56       0xa2 Src\main.o
- .debug_loc     0x00008ef8      0x3da Src\pll_4113.o
- .debug_loc     0x000092d2       0xf2 Src\stm32f1xx_hal_msp.o
- .debug_loc     0x000093c4      0x3ef Src\syscalls.o
- .debug_loc     0x000097b3       0xcd Src\system_stm32f1xx.o
- .debug_loc     0x00009880      0x108 Src\uart.o
- .debug_loc     0x00009988      0x3ad Src\zig_operate.o
+ .debug_loc     0x00008e56       0x8f Src\main.o
+ .debug_loc     0x00008ee5      0x3da Src\pll_4113.o
+ .debug_loc     0x000092bf       0xf2 Src\stm32f1xx_hal_msp.o
+ .debug_loc     0x000093b1      0x3ef Src\syscalls.o
+ .debug_loc     0x000097a0       0xcd Src\system_stm32f1xx.o
+ .debug_loc     0x0000986d      0x108 Src\uart.o
+ .debug_loc     0x00009975      0x3ad Src\zig_operate.o
 
 .debug_aranges  0x00000000      0xe00
  .debug_aranges
@@ -2619,7 +2623,7 @@ OUTPUT(STM32F103_ATTEN_PLL_Zig.elf elf32-littlearm)
  .debug_ranges  0x000011d0       0x48 Src\zig_operate.o
  .debug_ranges  0x00001218       0x20 startup\startup_stm32f103xe.o
 
-.debug_line     0x00000000     0x9c8a
+.debug_line     0x00000000     0x9d24
  .debug_line    0x00000000      0x45f Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal.o
  .debug_line    0x0000045f      0x863 Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_adc.o
  .debug_line    0x00000cc2      0x737 Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_adc_ex.o
@@ -2633,22 +2637,22 @@ OUTPUT(STM32F103_ATTEN_PLL_Zig.elf elf32-littlearm)
  .debug_line    0x00003911     0x1206 Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_tim.o
  .debug_line    0x00004b17      0x701 Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_tim_ex.o
  .debug_line    0x00005218      0xc45 Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_uart.o
- .debug_line    0x00005e5d      0x332 Src\AD5318.o
- .debug_line    0x0000618f      0x364 Src\BDA4601.o
- .debug_line    0x000064f3      0x37f Src\CRC16.o
- .debug_line    0x00006872      0x3ce Src\PE43711.o
- .debug_line    0x00006c40      0x49f Src\adf4153.o
- .debug_line    0x000070df      0x4f8 Src\flash.o
- .debug_line    0x000075d7      0x3d1 Src\includes.o
- .debug_line    0x000079a8      0x6bd Src\main.o
- .debug_line    0x00008065      0x3d0 Src\pll_4113.o
- .debug_line    0x00008435      0x4a2 Src\stm32f1xx_hal_msp.o
- .debug_line    0x000088d7      0x3cb Src\stm32f1xx_it.o
- .debug_line    0x00008ca2      0x3c0 Src\syscalls.o
- .debug_line    0x00009062      0x2bf Src\system_stm32f1xx.o
- .debug_line    0x00009321      0x38d Src\uart.o
- .debug_line    0x000096ae      0x55f Src\zig_operate.o
- .debug_line    0x00009c0d       0x7d startup\startup_stm32f103xe.o
+ .debug_line    0x00005e5d      0x340 Src\AD5318.o
+ .debug_line    0x0000619d      0x372 Src\BDA4601.o
+ .debug_line    0x0000650f      0x38d Src\CRC16.o
+ .debug_line    0x0000689c      0x3dc Src\PE43711.o
+ .debug_line    0x00006c78      0x4ad Src\adf4153.o
+ .debug_line    0x00007125      0x506 Src\flash.o
+ .debug_line    0x0000762b      0x3df Src\includes.o
+ .debug_line    0x00007a0a      0x6bd Src\main.o
+ .debug_line    0x000080c7      0x3de Src\pll_4113.o
+ .debug_line    0x000084a5      0x4b0 Src\stm32f1xx_hal_msp.o
+ .debug_line    0x00008955      0x3d9 Src\stm32f1xx_it.o
+ .debug_line    0x00008d2e      0x3c0 Src\syscalls.o
+ .debug_line    0x000090ee      0x2bf Src\system_stm32f1xx.o
+ .debug_line    0x000093ad      0x39b Src\uart.o
+ .debug_line    0x00009748      0x55f Src\zig_operate.o
+ .debug_line    0x00009ca7       0x7d startup\startup_stm32f103xe.o
 
 .debug_str      0x00000000     0x5746
  .debug_str     0x00000000      0xc6c Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal.o
@@ -2677,36 +2681,36 @@ OUTPUT(STM32F103_ATTEN_PLL_Zig.elf elf32-littlearm)
                                0x10cd (size before relaxing)
  .debug_str     0x00003986      0x6d6 Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_uart.o
                                0x1044 (size before relaxing)
- .debug_str     0x0000405c      0xa1d Src\AD5318.o
-                               0x14c0 (size before relaxing)
- .debug_str     0x00004a79       0x31 Src\BDA4601.o
-                               0x14cd (size before relaxing)
- .debug_str     0x00004aaa       0x85 Src\CRC16.o
-                               0x14ec (size before relaxing)
- .debug_str     0x00004b2f       0x6a Src\PE43711.o
-                               0x1555 (size before relaxing)
- .debug_str     0x00004b99      0x1ab Src\adf4153.o
-                               0x167a (size before relaxing)
- .debug_str     0x00004d44      0x117 Src\flash.o
-                               0x1690 (size before relaxing)
- .debug_str     0x00004e5b       0xa2 Src\includes.o
+ .debug_str     0x0000405c      0xa34 Src\AD5318.o
+                               0x14d7 (size before relaxing)
+ .debug_str     0x00004a90       0x31 Src\BDA4601.o
+                               0x14e4 (size before relaxing)
+ .debug_str     0x00004ac1       0x85 Src\CRC16.o
+                               0x1503 (size before relaxing)
+ .debug_str     0x00004b46       0x6a Src\PE43711.o
+                               0x156c (size before relaxing)
+ .debug_str     0x00004bb0      0x1ab Src\adf4153.o
+                               0x1691 (size before relaxing)
+ .debug_str     0x00004d5b      0x117 Src\flash.o
+                               0x16a7 (size before relaxing)
+ .debug_str     0x00004e72       0x8b Src\includes.o
                                0x1561 (size before relaxing)
  .debug_str     0x00004efd      0x128 Src\main.o
-                               0x2151 (size before relaxing)
+                               0x2168 (size before relaxing)
  .debug_str     0x00005025       0x84 Src\pll_4113.o
-                               0x1551 (size before relaxing)
+                               0x1568 (size before relaxing)
  .debug_str     0x000050a9       0x25 Src\stm32f1xx_hal_msp.o
-                               0x1cec (size before relaxing)
+                               0x1d03 (size before relaxing)
  .debug_str     0x000050ce      0x113 Src\stm32f1xx_it.o
-                               0x17c1 (size before relaxing)
+                               0x17d8 (size before relaxing)
  .debug_str     0x000051e1      0x256 Src\syscalls.o
                                 0x850 (size before relaxing)
  .debug_str     0x00005437       0x4d Src\system_stm32f1xx.o
                                 0x765 (size before relaxing)
  .debug_str     0x00005484       0x99 Src\uart.o
-                               0x15b7 (size before relaxing)
+                               0x15ce (size before relaxing)
  .debug_str     0x0000551d      0x229 Src\zig_operate.o
-                               0x18bf (size before relaxing)
+                               0x18d6 (size before relaxing)
 
 .comment        0x00000000       0x7c
  .comment       0x00000000       0x7c Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal.o

Inc/includes.h

@@ -25,7 +25,7 @@ typedef enum{
 void Power_ON_OFF_Ctrl(uint8_t type,uint8_t cmd);
 void Path_Init(void);
 void ATTEN_PLL_PATH_Initialize(void);
-
+char *Bluecell_Prot_IndexStr[];
 
 
 #endif /* INCLUDES_H_ */

STM32F103_ATTEN_PLL_Zig.ioc

@@ -32,27 +32,27 @@ ADC1.Rank-6\#ChannelRegularConversion=6
 ADC1.Rank-7\#ChannelRegularConversion=7
 ADC1.Rank-8\#ChannelRegularConversion=8
 ADC1.Rank-9\#ChannelRegularConversion=9
-ADC1.SamplingTime-1\#ChannelRegularConversion=ADC_SAMPLETIME_55CYCLES_5
-ADC1.SamplingTime-10\#ChannelRegularConversion=ADC_SAMPLETIME_55CYCLES_5
-ADC1.SamplingTime-11\#ChannelRegularConversion=ADC_SAMPLETIME_55CYCLES_5
-ADC1.SamplingTime-12\#ChannelRegularConversion=ADC_SAMPLETIME_55CYCLES_5
-ADC1.SamplingTime-13\#ChannelRegularConversion=ADC_SAMPLETIME_55CYCLES_5
-ADC1.SamplingTime-14\#ChannelRegularConversion=ADC_SAMPLETIME_55CYCLES_5
-ADC1.SamplingTime-2\#ChannelRegularConversion=ADC_SAMPLETIME_55CYCLES_5
-ADC1.SamplingTime-3\#ChannelRegularConversion=ADC_SAMPLETIME_55CYCLES_5
-ADC1.SamplingTime-4\#ChannelRegularConversion=ADC_SAMPLETIME_55CYCLES_5
-ADC1.SamplingTime-5\#ChannelRegularConversion=ADC_SAMPLETIME_55CYCLES_5
-ADC1.SamplingTime-6\#ChannelRegularConversion=ADC_SAMPLETIME_55CYCLES_5
-ADC1.SamplingTime-7\#ChannelRegularConversion=ADC_SAMPLETIME_55CYCLES_5
-ADC1.SamplingTime-8\#ChannelRegularConversion=ADC_SAMPLETIME_55CYCLES_5
-ADC1.SamplingTime-9\#ChannelRegularConversion=ADC_SAMPLETIME_55CYCLES_5
+ADC1.SamplingTime-1\#ChannelRegularConversion=ADC_SAMPLETIME_239CYCLES_5
+ADC1.SamplingTime-10\#ChannelRegularConversion=ADC_SAMPLETIME_239CYCLES_5
+ADC1.SamplingTime-11\#ChannelRegularConversion=ADC_SAMPLETIME_239CYCLES_5
+ADC1.SamplingTime-12\#ChannelRegularConversion=ADC_SAMPLETIME_239CYCLES_5
+ADC1.SamplingTime-13\#ChannelRegularConversion=ADC_SAMPLETIME_239CYCLES_5
+ADC1.SamplingTime-14\#ChannelRegularConversion=ADC_SAMPLETIME_239CYCLES_5
+ADC1.SamplingTime-2\#ChannelRegularConversion=ADC_SAMPLETIME_239CYCLES_5
+ADC1.SamplingTime-3\#ChannelRegularConversion=ADC_SAMPLETIME_239CYCLES_5
+ADC1.SamplingTime-4\#ChannelRegularConversion=ADC_SAMPLETIME_239CYCLES_5
+ADC1.SamplingTime-5\#ChannelRegularConversion=ADC_SAMPLETIME_239CYCLES_5
+ADC1.SamplingTime-6\#ChannelRegularConversion=ADC_SAMPLETIME_239CYCLES_5
+ADC1.SamplingTime-7\#ChannelRegularConversion=ADC_SAMPLETIME_239CYCLES_5
+ADC1.SamplingTime-8\#ChannelRegularConversion=ADC_SAMPLETIME_239CYCLES_5
+ADC1.SamplingTime-9\#ChannelRegularConversion=ADC_SAMPLETIME_239CYCLES_5
 ADC1.master=1
 Dma.ADC1.0.Direction=DMA_PERIPH_TO_MEMORY
 Dma.ADC1.0.Instance=DMA1_Channel1
-Dma.ADC1.0.MemDataAlignment=DMA_MDATAALIGN_HALFWORD
+Dma.ADC1.0.MemDataAlignment=DMA_MDATAALIGN_WORD
 Dma.ADC1.0.MemInc=DMA_MINC_ENABLE
 Dma.ADC1.0.Mode=DMA_CIRCULAR
-Dma.ADC1.0.PeriphDataAlignment=DMA_PDATAALIGN_HALFWORD
+Dma.ADC1.0.PeriphDataAlignment=DMA_PDATAALIGN_WORD
 Dma.ADC1.0.PeriphInc=DMA_PINC_DISABLE
 Dma.ADC1.0.Priority=DMA_PRIORITY_LOW
 Dma.ADC1.0.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority

Src/includes.c

@@ -9,7 +9,7 @@
 #define MACROSTR(k) #k
 
 
-static char *Bluecell_Prot_IndexStr[] = {
+char *Bluecell_Prot_IndexStr[] = {
     MACROSTR(INDEX_ATT_1_8G_DL1     ),
     MACROSTR(INDEX_ATT_1_8G_DL2     ),
     MACROSTR(INDEX_ATT_1_8G_UL1     ),

Src/main.c

@@ -222,6 +222,7 @@ int main(void)
     ATTEN_PLL_PATH_Initialize();
 
 //  ADF_Module_Ctrl(Pll_test,0x324000,0x144051,0x0017c2,0x0003c7);
+    HAL_ADC_Start_DMA(&hadc1, (uint32_t*)ADCvalue, 14);
 
   /* USER CODE END 2 */
 
@@ -229,7 +230,7 @@ int main(void)
   /* USER CODE BEGIN WHILE */
 //  while(HAL_ADCEx_Calibration_Start(&hadc1) != HAL_OK); //ADC Calibration 
 //   HAL_ADC_Start_DMA(&hadc1, (uint32_t*)ADCvalue, ADC_EA);
-  HAL_ADC_Start_DMA(&hadc1, (uint32_t*)ADCvalue, 14);  
+ 
   while (1)
   {
     if(HAL_GPIO_ReadPin(PLL_LD_3_5G_H_GPIO_Port, PLL_LD_3_5G_H_Pin) == GPIO_PIN_RESET 
@@ -247,25 +248,24 @@ int main(void)
     if(LedTimerCnt > 500){HAL_GPIO_TogglePin(BOOT_LED_GPIO_Port,GPIO_PIN_14);LedTimerCnt = 0;}
     while (TerminalQueue.data > 0 && UartRxTimerCnt > 100) GetDataFromUartQueue(&hTerminal);
     if(AdcTimerCnt > 2500){
-        for(uint8_t i = 0; i< ADC_EA; i += 2 ){
-            Prev_data[INDEX_DET_1_8G_DL_IN_H + i]     = (uint16_t)((ADCvalue[i] & 0xFF00) >> 8);
-            Prev_data[INDEX_DET_1_8G_DL_IN_L + i]     = (uint16_t)(ADCvalue[i] & 0x00FF);
-//            printf("Prev_data[INDEX_DET_1_8G_DL_IN_H + i] : %x\r\n",Prev_data[INDEX_DET_1_8G_DL_IN_H + i]);
-//            printf("Prev_data[INDEX_DET_1_8G_DL_IN_L + i] : %x\r\n",Prev_data[INDEX_DET_1_8G_DL_IN_L]);            
+        
+        for(uint8_t i = 0; i< ADC_EA; i++ ){
+            Prev_data[INDEX_DET_1_8G_DL_IN_H + i*2]     = (uint16_t)((ADCvalue[i] & 0xFF00) >> 8);
+            Prev_data[INDEX_DET_1_8G_DL_IN_L + i*2]     = (uint16_t)(ADCvalue[i] & 0x00FF);
+//            printf("Prev_data[%d] : %x",i,Prev_data[INDEX_DET_1_8G_DL_IN_H + i]);
+//            printf("%x\r\n",i,Prev_data[INDEX_DET_1_8G_DL_IN_L + i]);            
         }
 //        for(int i = 0; i < 14; i++)
 //            printf("\r\nYJ[%d] : %x \r\n",i,ADCvalue[i]);
 //        HAL_Delay(3000);
-#if 1 // PYJ.2019.07.29_BEGIN -- 
-//        printf("====================================\r\n");
-//            for(uint8_t i = 0; i< ADC_EA; i++){
-//                printf("%x",ADCvalue[0]);
-//                printf("\r\n");
-//                printf("%d",ADCvalue[i]);
-//                printf("\r\n");
-//            }
+#if 0 // PYJ.2019.07.29_BEGIN -- 
+        double tmp_volt = 3.3/4095;
+        printf("====================================\r\n");
+            for(uint8_t i = 0; i< ADC_EA; i++){
+                printf("%s :  %f V \r\n",  Bluecell_Prot_IndexStr[INDEX_DET_1_8G_DL_IN_H + i + 1],ADCvalue[i] * tmp_volt);
+            }
 //                printf("\r\nADC[%d] : %d\r\n ",i,ADCvalue[i]);
-//        printf("====================================\r\n");
+        printf("====================================\r\n");
 #endif // PYJ.2019.07.29_END -- 
         AdcTimerCnt = 0;
 
@@ -378,7 +378,7 @@ static void MX_ADC1_Init(void)
   */
   sConfig.Channel = ADC_CHANNEL_0;
   sConfig.Rank = ADC_REGULAR_RANK_1;
-  sConfig.SamplingTime = ADC_SAMPLETIME_55CYCLES_5;
+  sConfig.SamplingTime = ADC_SAMPLETIME_239CYCLES_5;
   if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
   {
     Error_Handler();

Src/stm32f1xx_hal_msp.c

@@ -141,8 +141,8 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
     hdma_adc1.Init.Direction = DMA_PERIPH_TO_MEMORY;
     hdma_adc1.Init.PeriphInc = DMA_PINC_DISABLE;
     hdma_adc1.Init.MemInc = DMA_MINC_ENABLE;
-    hdma_adc1.Init.PeriphDataAlignment = DMA_PDATAALIGN_HALFWORD;
-    hdma_adc1.Init.MemDataAlignment = DMA_MDATAALIGN_HALFWORD;
+    hdma_adc1.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD;
+    hdma_adc1.Init.MemDataAlignment = DMA_MDATAALIGN_WORD;
     hdma_adc1.Init.Mode = DMA_CIRCULAR;
     hdma_adc1.Init.Priority = DMA_PRIORITY_LOW;
     if (HAL_DMA_Init(&hdma_adc1) != HAL_OK)

insight/STM32F103_ATTEN_PLL_Zig.si4project/Backup/includes(3427).c

@@ -0,0 +1,249 @@
+/*
+ * includes.c
+ *
+ *  Created on: 2019. 7. 28.
+ *      Author: parkyj
+ */
+#include "includes.h"
+
+#define MACROSTR(k) #k
+
+
+static char *Bluecell_Prot_IndexStr[] = {
+    MACROSTR(INDEX_ATT_1_8G_DL1     ),
+    MACROSTR(INDEX_ATT_1_8G_DL2     ),
+    MACROSTR(INDEX_ATT_1_8G_UL1     ),
+    MACROSTR(INDEX_ATT_1_8G_UL2     ),
+    MACROSTR(INDEX_ATT_1_8G_UL3     ),
+    MACROSTR(INDEX_ATT_1_8G_UL4     ),
+    MACROSTR(INDEX_ATT_2_1G_DL1     ),
+    MACROSTR(INDEX_ATT_2_1G_DL2     ),
+    MACROSTR(INDEX_ATT_2_1G_UL1     ),
+    MACROSTR(INDEX_ATT_2_1G_UL2     ),
+    MACROSTR(INDEX_ATT_2_1G_UL3     ),
+    MACROSTR(INDEX_ATT_2_1G_UL4     ),
+    MACROSTR(INDEX_ATT_3_5G_DL      ),
+    MACROSTR(INDEX_ATT_3_5G_UL      ),
+    MACROSTR(INDEX_ATT_3_5G_COM1    ),
+    MACROSTR(INDEX_ATT_3_5G_COM2    ),
+    MACROSTR(INDEX_ATT_3_5G_COM3    ),
+    MACROSTR(INDEX_PLL_1_8G_DL_H    ),
+    MACROSTR(INDEX_PLL_1_8G_DL_L    ),
+    MACROSTR(INDEX_PLL_1_8G_UL_H    ),
+    MACROSTR(INDEX_PLL_1_8G_UL_L    ),
+    MACROSTR(INDEX_PLL_2_1G_DL_H    ),
+    MACROSTR(INDEX_PLL_2_1G_DL_L    ),
+    MACROSTR(INDEX_PLL_2_1G_UL_H    ),
+    MACROSTR(INDEX_PLL_2_1G_UL_L    ),
+    MACROSTR(INDEX_PLL_3_5G_DL_H    ),
+    MACROSTR(INDEX_PLL_3_5G_DL_L    ),
+    MACROSTR(INDEX_PLL_3_5G_UL_H    ),
+    MACROSTR(INDEX_PLL_3_5G_UL_L    ),
+    MACROSTR(INDEX_PLL_LD_6_BIT     ),
+    MACROSTR(INDEX_DET_1_8G_DL_IN_H ),
+    MACROSTR(INDEX_DET_1_8G_DL_IN_L ),
+    MACROSTR(INDEX_DET_1_8G_DL_OUT_H),
+    MACROSTR(INDEX_DET_1_8G_DL_OUT_L),
+    MACROSTR(INDEX_DET_1_8G_UL_IN_H ),
+    MACROSTR(INDEX_DET_1_8G_UL_IN_L ),
+    MACROSTR(INDEX_DET_1_8G_UL_OUT_H),
+    MACROSTR(INDEX_DET_1_8G_UL_OUT_L),
+    MACROSTR(INDEX_DET_2_1G_DL_IN_H ),
+    MACROSTR(INDEX_DET_2_1G_DL_IN_L ),
+    MACROSTR(INDEX_DET_2_1G_DL_OUT_H),
+    MACROSTR(INDEX_DET_2_1G_DL_OUT_L),
+    MACROSTR(INDEX_DET_2_1G_UL_IN_H ),
+    MACROSTR(INDEX_DET_2_1G_UL_IN_L ),
+    MACROSTR(INDEX_DET_2_1G_UL_OUT_H),
+    MACROSTR(INDEX_DET_2_1G_UL_OUT_L),
+    MACROSTR(INDEX_DET_3_5G_DL_IN_H ),
+    MACROSTR(INDEX_DET_3_5G_DL_IN_L ),
+    MACROSTR(INDEX_DET_3_5G_DL_OUT_L),
+    MACROSTR(INDEX_DET_3_5G_DL_OUT_H),
+    MACROSTR(INDEX_DET_3_5G_UL_IN_H ),
+    MACROSTR(INDEX_DET_3_5G_UL_IN_L ),
+    MACROSTR(INDEX_DET_3_5G_UL_OUT_H),
+    MACROSTR(INDEX_DET_3_5G_UL_OUT_L),
+    MACROSTR(INDEX_RFU_TEMP_H       ),
+    MACROSTR(INDEX_RFU_TEMP_L       ),
+    MACROSTR(INDEX__28V_DET_H       ),
+    MACROSTR(INDEX__28V_DET_L       ),
+    MACROSTR(INDEX_ALARM_AC         ),
+    MACROSTR(INDEX_ALARM_DC         ),
+    MACROSTR(INDEX_PATH_EN_1_8G_DL  ),
+    MACROSTR(INDEX_PATH_EN_1_8G_UL  ),
+    MACROSTR(INDEX_PATH_EN_2_1G_DL  ),
+    MACROSTR(INDEX_PATH_EN_2_1G_UL  ),
+    MACROSTR(INDEX_PATH_EN_3_5G_L   ),
+    MACROSTR(INDEX_PATH_EN_3_5G_H   ),
+    MACROSTR(INDEX_PATH_EN_3_5G_DL  ),
+    MACROSTR(INDEX_PATH_EN_3_5G_UL  ),
+    MACROSTR(INDEX_PLL_ON_OFF_3_5G_H),
+    MACROSTR(INDEX_PLL_ON_OFF_3_5G_L),
+    MACROSTR(INDEX_T_SYNC_DL        ),
+    MACROSTR(INDEX__T_SYNC_DL       ),
+    MACROSTR(INDEX_T_SYNC_UL        ),
+    MACROSTR(INDEX__T_SYNC_UL       ),   
+};
+
+static void kConstPrinter(Bluecell_Prot_Index k)
+{
+#ifdef DEBUG_PRINT
+    printf("%s", Bluecell_Prot_IndexStr[k]);
+#endif /* DEBUG_PRINT */
+}
+void Path_Init(void){
+    Prev_data[INDEX_PATH_EN_1_8G_DL]   = HAL_GPIO_ReadPin(PATH_EN_1_8G_DL_GPIO_Port,PATH_EN_1_8G_DL_Pin);
+    Prev_data[INDEX_PATH_EN_1_8G_UL]   = HAL_GPIO_ReadPin(PATH_EN_1_8G_UL_GPIO_Port,PATH_EN_1_8G_UL_Pin);
+    Prev_data[INDEX_PATH_EN_2_1G_DL]   = HAL_GPIO_ReadPin(PATH_EN_2_1G_DL_GPIO_Port,PATH_EN_2_1G_DL_Pin);
+    Prev_data[INDEX_PATH_EN_2_1G_UL]   = HAL_GPIO_ReadPin(PATH_EN_2_1G_UL_GPIO_Port,PATH_EN_2_1G_UL_Pin);
+    Prev_data[INDEX_PATH_EN_3_5G_L]    = HAL_GPIO_ReadPin(PATH_EN_3_5G_L_GPIO_Port,PATH_EN_3_5G_L_Pin);
+    Prev_data[INDEX_PATH_EN_3_5G_H]    = HAL_GPIO_ReadPin(PATH_EN_3_5G_H_GPIO_Port,PATH_EN_3_5G_H_Pin);
+    Prev_data[INDEX_PATH_EN_3_5G_DL]   = HAL_GPIO_ReadPin(PATH_EN_3_5G_DL_GPIO_Port,PATH_EN_3_5G_DL_Pin);
+    Prev_data[INDEX_PATH_EN_3_5G_UL]   = HAL_GPIO_ReadPin(PATH_EN_3_5G_UL_GPIO_Port,PATH_EN_3_5G_UL_Pin);
+    Prev_data[INDEX_PLL_ON_OFF_3_5G_H] = HAL_GPIO_ReadPin(PLL_ON_OFF_3_5G_H_GPIO_Port,PLL_ON_OFF_3_5G_H_Pin);
+    Prev_data[INDEX_PLL_ON_OFF_3_5G_L] = HAL_GPIO_ReadPin(PLL_ON_OFF_3_5G_L_GPIO_Port,PLL_ON_OFF_3_5G_L_Pin);
+}
+void Power_ON_OFF_Ctrl(uint8_t type,uint8_t cmd){
+//    printf("\r\ntype : %s cmd : %d\r\n",Bluecell_Prot_IndexStr[type - 4],cmd);
+    switch(type){
+        case INDEX_PATH_EN_1_8G_DL  : 
+#if 0 // PYJ.2019.07.29_BEGIN -- 
+            printf("\r\n LINE %d\r\n",__LINE__);
+#endif // PYJ.2019.07.29_END -- 
+            if(cmd)
+                HAL_GPIO_WritePin(PATH_EN_1_8G_DL_GPIO_Port,PATH_EN_1_8G_DL_Pin, GPIO_PIN_SET);
+            else
+                HAL_GPIO_WritePin(PATH_EN_1_8G_DL_GPIO_Port,PATH_EN_1_8G_DL_Pin, GPIO_PIN_RESET);
+            break; 
+        case INDEX_PATH_EN_1_8G_UL  : 
+#if 0 // PYJ.2019.07.29_BEGIN -- 
+            printf("\r\n LINE %d\r\n",__LINE__);
+#endif // PYJ.2019.07.29_END -- 
+            if(cmd)
+                HAL_GPIO_WritePin(PATH_EN_1_8G_UL_GPIO_Port,PATH_EN_1_8G_UL_Pin, GPIO_PIN_SET);
+            else
+                HAL_GPIO_WritePin(PATH_EN_1_8G_UL_GPIO_Port,PATH_EN_1_8G_UL_Pin, GPIO_PIN_RESET);
+                
+            break;
+        case INDEX_PATH_EN_2_1G_DL  : 
+#ifdef DEBUG_PRINT
+            printf("\r\n LINE %d\r\n",__LINE__);
+#endif /* DEBUG_PRINT */
+            if(cmd)
+                HAL_GPIO_WritePin(PATH_EN_2_1G_DL_GPIO_Port,PATH_EN_2_1G_DL_Pin, GPIO_PIN_SET);
+            else
+                HAL_GPIO_WritePin(PATH_EN_2_1G_DL_GPIO_Port,PATH_EN_2_1G_DL_Pin, GPIO_PIN_RESET);                
+            break;
+        case INDEX_PATH_EN_2_1G_UL  : 
+#ifdef DEBUG_PRINT
+            printf("\r\n LINE %d\r\n",__LINE__);
+#endif /* DEBUG_PRINT */
+            if(cmd)
+                HAL_GPIO_WritePin(PATH_EN_2_1G_UL_GPIO_Port,PATH_EN_2_1G_UL_Pin, GPIO_PIN_SET);
+            else
+                HAL_GPIO_WritePin(PATH_EN_2_1G_UL_GPIO_Port,PATH_EN_2_1G_UL_Pin, GPIO_PIN_RESET);                
+            break;
+        case INDEX_PATH_EN_3_5G_L   : 
+            if(cmd){
+                HAL_GPIO_WritePin(PATH_EN_3_5G_L_GPIO_Port,PATH_EN_3_5G_L_Pin, GPIO_PIN_SET);
+//                printf("\r\n LINE %d\r\n",__LINE__);
+            }
+            else{
+                HAL_GPIO_WritePin(PATH_EN_3_5G_L_GPIO_Port,PATH_EN_3_5G_L_Pin, GPIO_PIN_RESET);
+//                printf("\r\n LINE %d\r\n",__LINE__);
+            }
+            break;
+        case INDEX_PATH_EN_3_5G_H   : 
+            if(cmd){
+                HAL_GPIO_WritePin(PATH_EN_3_5G_H_GPIO_Port,PATH_EN_3_5G_H_Pin, GPIO_PIN_SET);
+//                            printf("\r\n LINE %d\r\n",__LINE__);
+            }
+            else{
+                HAL_GPIO_WritePin(PATH_EN_3_5G_H_GPIO_Port,PATH_EN_3_5G_H_Pin, GPIO_PIN_RESET);
+//                            printf("\r\n LINE %d\r\n",__LINE__);
+            }
+            break;
+        case INDEX_PATH_EN_3_5G_DL  : 
+#ifdef DEBUG_PRINT
+            printf("\r\n LINE %d\r\n",__LINE__);
+#endif /* DEBUG_PRINT */
+            if(cmd)
+                HAL_GPIO_WritePin(PATH_EN_3_5G_DL_GPIO_Port,PATH_EN_3_5G_DL_Pin, GPIO_PIN_SET);
+            else
+                HAL_GPIO_WritePin(PATH_EN_3_5G_DL_GPIO_Port,PATH_EN_3_5G_DL_Pin, GPIO_PIN_RESET);
+            break;
+        case INDEX_PATH_EN_3_5G_UL  : 
+#ifdef DEBUG_PRINT
+            printf("\r\n LINE %d\r\n",__LINE__);
+#endif /* DEBUG_PRINT */
+            if(cmd)
+                HAL_GPIO_WritePin(PATH_EN_3_5G_UL_GPIO_Port,PATH_EN_3_5G_UL_Pin, GPIO_PIN_SET);
+            else
+                HAL_GPIO_WritePin(PATH_EN_3_5G_UL_GPIO_Port,PATH_EN_3_5G_UL_Pin, GPIO_PIN_RESET);
+            break;
+        case INDEX_PLL_ON_OFF_3_5G_H: 
+//            printf("\r\n LINE %d\r\n",__LINE__);
+            if(cmd)
+                HAL_GPIO_WritePin(PLL_ON_OFF_3_5G_H_GPIO_Port,PLL_ON_OFF_3_5G_H_Pin, GPIO_PIN_SET);
+            else
+                HAL_GPIO_WritePin(PLL_ON_OFF_3_5G_H_GPIO_Port,PLL_ON_OFF_3_5G_H_Pin, GPIO_PIN_RESET);
+            break;
+        case INDEX_PLL_ON_OFF_3_5G_L: 
+//            printf("\r\n LINE %d\r\n",__LINE__);
+            if(cmd)
+                HAL_GPIO_WritePin(PLL_ON_OFF_3_5G_L_GPIO_Port,PLL_ON_OFF_3_5G_L_Pin, GPIO_PIN_SET);  
+            else
+                HAL_GPIO_WritePin(PLL_ON_OFF_3_5G_L_GPIO_Port,PLL_ON_OFF_3_5G_L_Pin, GPIO_PIN_RESET);
+            break;
+        case INDEX_T_SYNC_DL:
+        case INDEX__T_SYNC_UL:
+        case INDEX_T_SYNC_UL:
+        case INDEX__T_SYNC_DL:
+            if(cmd){
+                HAL_GPIO_WritePin(_T_SYNC_UL_GPIO_Port,_T_SYNC_UL_Pin, GPIO_PIN_RESET);
+                HAL_GPIO_WritePin(T_SYNC_UL_GPIO_Port,T_SYNC_UL_Pin, GPIO_PIN_RESET);
+                HAL_GPIO_WritePin(_T_SYNC_DL_GPIO_Port,_T_SYNC_DL_Pin, GPIO_PIN_SET);
+                HAL_GPIO_WritePin(T_SYNC_DL_GPIO_Port,T_SYNC_DL_Pin, GPIO_PIN_SET);                
+            }
+            else{
+                HAL_GPIO_WritePin(_T_SYNC_UL_GPIO_Port,_T_SYNC_UL_Pin, GPIO_PIN_SET);
+                HAL_GPIO_WritePin(T_SYNC_UL_GPIO_Port,T_SYNC_UL_Pin, GPIO_PIN_SET);
+                HAL_GPIO_WritePin(_T_SYNC_DL_GPIO_Port,_T_SYNC_DL_Pin, GPIO_PIN_RESET);
+                HAL_GPIO_WritePin(T_SYNC_DL_GPIO_Port,T_SYNC_DL_Pin, GPIO_PIN_RESET);                
+            }
+#ifdef DEBUG_PRINT
+            printf("TDD SYNC OPERATE ; %d\r\n",cmd);
+#endif /* DEBUG_PRINT */
+            break;
+        default :
+#ifdef DEBUG_PRINT
+        printf("Function : %s LINE : %d   ERROR \r\n",__func__,__LINE__);
+#endif /* DEBUG_PRINT */
+    break;
+
+    }
+}
+void ATTEN_PLL_PATH_Initialize(void){
+#if 0 // PYJ.2019.07.31_BEGIN -- 
+        for(int i = 0; i < INDEX_BLUE_EOF + 1; i++){
+            printf("Data = %x\r\n",  Flash_Save_data[i]);
+        }
+#endif // PYJ.2019.07.31_END -- 
+    Flash_Save_data[INDEX_BLUE_CRC]      = STH30_CreateCrc(&Flash_Save_data[Type], Flash_Save_data[Length]);
+    RF_Ctrl_Main(&Flash_Save_data[INDEX_BLUE_HEADER]);
+    RF_Status_Get();
+}
+void Power_ON_OFF_Initialize(void){
+    HAL_GPIO_WritePin(PATH_EN_3_5G_L_GPIO_Port,PATH_EN_3_5G_L_Pin, GPIO_PIN_RESET);
+    HAL_GPIO_WritePin(PATH_EN_3_5G_H_GPIO_Port,PATH_EN_3_5G_H_Pin, GPIO_PIN_RESET);
+    HAL_GPIO_WritePin(PATH_EN_3_5G_DL_GPIO_Port,PATH_EN_3_5G_DL_Pin, GPIO_PIN_RESET);
+    HAL_GPIO_WritePin(PATH_EN_3_5G_UL_GPIO_Port,PATH_EN_3_5G_UL_Pin, GPIO_PIN_RESET);
+    HAL_GPIO_WritePin(PATH_EN_3_5G_L_GPIO_Port,PATH_EN_3_5G_L_Pin, GPIO_PIN_RESET);  
+    HAL_GPIO_WritePin(PLL_ON_OFF_3_5G_H_GPIO_Port,PLL_ON_OFF_3_5G_H_Pin, GPIO_PIN_RESET);
+    HAL_GPIO_WritePin(PLL_ON_OFF_3_5G_L_GPIO_Port,PLL_ON_OFF_3_5G_L_Pin, GPIO_PIN_RESET);  
+    HAL_GPIO_WritePin(PATH_EN_2_1G_DL_GPIO_Port,PATH_EN_2_1G_DL_Pin, GPIO_PIN_RESET);
+    HAL_GPIO_WritePin(PATH_EN_2_1G_UL_GPIO_Port,PATH_EN_2_1G_UL_Pin, GPIO_PIN_RESET);
+    HAL_GPIO_WritePin(PATH_EN_1_8G_DL_GPIO_Port,PATH_EN_1_8G_DL_Pin, GPIO_PIN_RESET);
+    HAL_GPIO_WritePin(PATH_EN_1_8G_UL_GPIO_Port,PATH_EN_1_8G_UL_Pin, GPIO_PIN_RESET);
+}

insight/STM32F103_ATTEN_PLL_Zig.si4project/Backup/includes(6579).h

@@ -0,0 +1,31 @@
+/*
+ * includes.h
+ *
+ *  Created on: 2019. 7. 28.
+ *      Author: parkyj
+ */
+
+#ifndef INCLUDES_H_
+#define INCLUDES_H_
+#include "main.h"
+#if 0 // PYJ.2019.07.28_BEGIN -- 
+typedef enum{
+    TYPE_PATH_EN_1_8G_DL  = 0 , 
+    TYPE_PATH_EN_1_8G_UL  ,
+    TYPE_PATH_EN_2_1G_DL  ,
+    TYPE_PATH_EN_2_1G_UL  ,
+    TYPE_PATH_EN_3_5G_L   ,
+    TYPE_PATH_EN_3_5G_H   ,
+    TYPE_PATH_EN_3_5G_DL  ,
+    TYPE_PATH_EN_3_5G_UL  ,
+    TYPE_PLL_ON_OFF_3_5G_L,
+    TYPE_PLL_ON_OFF_3_5G_H,
+}Bluecell_Power_Index;
+#endif // PYJ.2019.07.28_END -- 
+void Power_ON_OFF_Ctrl(uint8_t type,uint8_t cmd);
+void Path_Init(void);
+void ATTEN_PLL_PATH_Initialize(void);
+
+
+
+#endif /* INCLUDES_H_ */

insight/STM32F103_ATTEN_PLL_Zig.si4project/Backup/main(6049).c

@@ -0,0 +1,751 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : main.c
+  * @brief          : Main program body
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN PTD */
+
+/* USER CODE END PTD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+ADC_HandleTypeDef hadc1;
+DMA_HandleTypeDef hdma_adc1;
+
+TIM_HandleTypeDef htim6;
+
+UART_HandleTypeDef huart1;
+DMA_HandleTypeDef hdma_usart1_rx;
+DMA_HandleTypeDef hdma_usart1_tx;
+
+/* USER CODE BEGIN PV */
+volatile uint32_t AdcTimerCnt = 0;
+volatile uint32_t LedTimerCnt = 0;
+volatile uint32_t UartRxTimerCnt = 0;
+extern PLL_Setting_st Pll_3_5_H;
+extern PLL_Setting_st Pll_3_5_L;
+
+//volatile uint32_t UartTxTimerCnt = 0;
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+void SystemClock_Config(void);
+static void MX_GPIO_Init(void);
+static void MX_DMA_Init(void);
+static void MX_ADC1_Init(void);
+static void MX_USART1_UART_Init(void);
+static void MX_TIM6_Init(void);
+static void MX_NVIC_Init(void);
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+uint32_t ADCvalue[ADC_EA];
+
+#if 1 // PYJ.2019.07.26_BEGIN --
+
+void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
+{
+    if(htim->Instance == TIM6){
+        UartRxTimerCnt++;
+        LedTimerCnt++;
+        AdcTimerCnt++;
+    }
+} 
+#endif // PYJ.2019.07.26_END -- 
+int _write (int file, uint8_t *ptr, uint16_t len)
+{
+    HAL_UART_Transmit(&huart1, ptr, len,10);
+//    HAL_UART_Transmit_IT(&huart1, ptr, len);
+    return len;
+}
+void Pol_Delay_us(volatile uint32_t microseconds)
+{
+  /* Go to number of cycles for system */
+  microseconds *= (SystemCoreClock / 1000000);
+ 
+  /* Delay till end */
+  while (microseconds--);
+}
+/* define address bits for addressing dac outputs. */
+#define SPI_DAC_ADDR0  (1 << 12)
+#define SPI_DAC_ADDR1  (1 << 13)
+#define SPI_DAC_ADDR2  (1 << 14)
+
+/* define addresses for each dac output. */
+#define SPI_DAC_OUTPUT_A   0x00
+#define SPI_DAC_OUTPUT_B   SPI_DAC_ADDR0
+#define SPI_DAC_OUTPUT_C   SPI_DAC_ADDR1
+#define SPI_DAC_OUTPUT_D  (SPI_DAC_ADDR1 | SPI_DAC_ADDR0)
+#define SPI_DAC_OUTPUT_E   SPI_DAC_ADDR2
+#define SPI_DAC_OUTPUT_F  (SPI_DAC_ADDR2 | SPI_DAC_ADDR0)
+#define SPI_DAC_OUTPUT_G  (SPI_DAC_ADDR2 | SPI_DAC_ADDR1)
+#define SPI_DAC_OUTPUT_H  (SPI_DAC_ADDR2 | SPI_DAC_ADDR1 | SPI_DAC_ADDR0)
+
+
+/* USER CODE END 0 */
+
+/**
+  * @brief  The application entry point.
+  * @retval int
+  */
+int main(void)
+{
+  /* USER CODE BEGIN 1 */
+
+  /* USER CODE END 1 */
+  
+
+  /* MCU Configuration--------------------------------------------------------*/
+
+  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
+  HAL_Init();
+
+  /* USER CODE BEGIN Init */
+
+  /* USER CODE END Init */
+
+  /* Configure the system clock */
+  SystemClock_Config();
+
+  /* USER CODE BEGIN SysInit */
+
+  /* USER CODE END SysInit */
+
+  /* Initialize all configured peripherals */
+  MX_GPIO_Init();
+  MX_DMA_Init();
+  MX_ADC1_Init();
+  MX_USART1_UART_Init();
+  MX_TIM6_Init();
+
+  /* Initialize interrupts */
+  MX_NVIC_Init();
+  /* USER CODE BEGIN 2 */
+  setbuf(stdout, NULL);
+#ifdef DEBUG_PRINT
+  printf("UART Start \r\n");
+#endif /* DEBUG_PRINT */
+    HAL_UART_Receive_DMA(&huart1, TerminalQueue.Buffer, 1);
+    PE43711_PinInit();
+    /* * * PATH PLL ON OFF SECTION* * */
+    HAL_GPIO_WritePin(PATH_EN_1_8G_DL_GPIO_Port,PATH_EN_1_8G_DL_Pin, GPIO_PIN_RESET);
+    HAL_GPIO_WritePin(PATH_EN_1_8G_UL_GPIO_Port,PATH_EN_1_8G_UL_Pin, GPIO_PIN_RESET);
+    HAL_GPIO_WritePin(PATH_EN_2_1G_DL_GPIO_Port,PATH_EN_2_1G_DL_Pin, GPIO_PIN_RESET);
+    HAL_GPIO_WritePin(PATH_EN_2_1G_UL_GPIO_Port,PATH_EN_2_1G_UL_Pin, GPIO_PIN_RESET);
+    HAL_GPIO_WritePin(PATH_EN_3_5G_DL_GPIO_Port,PATH_EN_3_5G_DL_Pin, GPIO_PIN_RESET);
+    HAL_GPIO_WritePin(PATH_EN_3_5G_UL_GPIO_Port,PATH_EN_3_5G_UL_Pin, GPIO_PIN_RESET);
+    HAL_GPIO_WritePin(PATH_EN_3_5G_H_GPIO_Port,PATH_EN_3_5G_H_Pin, GPIO_PIN_RESET);
+    HAL_GPIO_WritePin(PATH_EN_3_5G_L_GPIO_Port,PATH_EN_3_5G_L_Pin, GPIO_PIN_RESET);
+
+    HAL_GPIO_WritePin(PLL_ON_OFF_3_5G_H_GPIO_Port,PLL_ON_OFF_3_5G_H_Pin, GPIO_PIN_SET);
+    HAL_GPIO_WritePin(PLL_ON_OFF_3_5G_L_GPIO_Port,PLL_ON_OFF_3_5G_L_Pin, GPIO_PIN_SET);  
+    
+    HAL_GPIO_WritePin(_T_SYNC_UL_GPIO_Port,_T_SYNC_UL_Pin, GPIO_PIN_RESET);
+    HAL_GPIO_WritePin(T_SYNC_UL_GPIO_Port,T_SYNC_UL_Pin, GPIO_PIN_RESET);
+    HAL_GPIO_WritePin(_T_SYNC_DL_GPIO_Port,_T_SYNC_DL_Pin, GPIO_PIN_SET);
+    HAL_GPIO_WritePin(T_SYNC_DL_GPIO_Port,T_SYNC_DL_Pin, GPIO_PIN_SET);     
+    
+    HAL_Delay(1);
+    Path_Init();
+    
+    ADF4153_Init();
+    SubmitDAC(0x800C);
+    SubmitDAC(0xA000);
+//    HAL_Delay(1);
+#if 1
+// PYJ.2019.07.30_BEGIN -- 
+    SubmitDAC(0x0FFF);
+    SubmitDAC(0x13FF);
+    SubmitDAC(0x24FF);
+    SubmitDAC(0x35FF);
+    SubmitDAC(0x46FF);
+    SubmitDAC(0x57FF);
+    SubmitDAC(0x68FF);
+    SubmitDAC(0x79FF);
+#endif // PYJ.2019.07.30_END -- 
+        
+//    ad53_write(0x2BFF);
+
+#ifdef DEBUG_PRINT
+  printf("\r\nPLL_EN_3_5G_L_GPIO_Port\r\n");
+#endif /* DEBUG_PRINT */
+  
+#ifdef DEBUG_PRINT
+  printf("\r\nPLL_EN_2_1G_UL_GPIO_Port\r\n");
+#endif /* DEBUG_PRINT */
+  HAL_Delay(1);
+  ADF4113_Initialize();
+//  BDA4601_Test();
+
+  while(!(HAL_ADCEx_Calibration_Start(&hadc1)==HAL_OK));
+//    HAL_ADCEx_Calibration_Start(&hadc1);
+    ADF4153_R_N_Reg_st temp_reg;
+    Bluecell_Flash_Read(&Flash_Save_data[INDEX_BLUE_HEADER]);
+    ATTEN_PLL_PATH_Initialize();
+
+//  ADF_Module_Ctrl(Pll_test,0x324000,0x144051,0x0017c2,0x0003c7);
+
+  /* USER CODE END 2 */
+
+  /* Infinite loop */
+  /* USER CODE BEGIN WHILE */
+//  while(HAL_ADCEx_Calibration_Start(&hadc1) != HAL_OK); //ADC Calibration 
+//   HAL_ADC_Start_DMA(&hadc1, (uint32_t*)ADCvalue, ADC_EA);
+  HAL_ADC_Start_DMA(&hadc1, (uint32_t*)ADCvalue, 14);  
+  while (1)
+  {
+    if(HAL_GPIO_ReadPin(PLL_LD_3_5G_H_GPIO_Port, PLL_LD_3_5G_H_Pin) == GPIO_PIN_RESET 
+        && HAL_GPIO_ReadPin(PLL_ON_OFF_3_5G_H_GPIO_Port, PLL_ON_OFF_3_5G_H_Pin) == GPIO_PIN_SET){
+        temp_reg = ADF4153_Freq_Calc(3934500000,ADF4153_REFIN,ADF4153_RCOUNTER,ADF4153_CHANNEL_SPACING);
+        ADF4153_Module_Ctrl(Pll_3_5_H,temp_reg.N_reg,temp_reg.R_reg,0x13c2,0x3);
+        HAL_Delay(1);
+    }
+    if(HAL_GPIO_ReadPin(PLL_LD_3_5G_L_GPIO_Port, PLL_LD_3_5G_L_Pin) == GPIO_PIN_RESET
+        || HAL_GPIO_ReadPin(PLL_ON_OFF_3_5G_L_GPIO_Port, PLL_ON_OFF_3_5G_L_Pin) == GPIO_PIN_SET){
+        temp_reg = ADF4153_Freq_Calc(3465500000,ADF4153_REFIN,ADF4153_RCOUNTER,ADF4153_CHANNEL_SPACING);
+        ADF4153_Module_Ctrl(Pll_3_5_L,temp_reg.N_reg,temp_reg.R_reg,0x13c2,0x3);
+        HAL_Delay(1);
+    }
+    if(LedTimerCnt > 500){HAL_GPIO_TogglePin(BOOT_LED_GPIO_Port,GPIO_PIN_14);LedTimerCnt = 0;}
+    while (TerminalQueue.data > 0 && UartRxTimerCnt > 100) GetDataFromUartQueue(&hTerminal);
+    if(AdcTimerCnt > 2500){
+        for(uint8_t i = 0; i< ADC_EA; i += 2 ){
+            Prev_data[INDEX_DET_1_8G_DL_IN_H + i]     = (uint16_t)((ADCvalue[i] & 0xFF00) >> 8);
+            Prev_data[INDEX_DET_1_8G_DL_IN_L + i]     = (uint16_t)(ADCvalue[i] & 0x00FF);
+//            printf("Prev_data[INDEX_DET_1_8G_DL_IN_H + i] : %x\r\n",Prev_data[INDEX_DET_1_8G_DL_IN_H + i]);
+//            printf("Prev_data[INDEX_DET_1_8G_DL_IN_L + i] : %x\r\n",Prev_data[INDEX_DET_1_8G_DL_IN_L]);            
+        }
+//        for(int i = 0; i < 14; i++)
+//            printf("\r\nYJ[%d] : %x \r\n",i,ADCvalue[i]);
+//        HAL_Delay(3000);
+#if 1 // PYJ.2019.07.29_BEGIN -- 
+//        printf("====================================\r\n");
+//            for(uint8_t i = 0; i< ADC_EA; i++){
+//                printf("%x",ADCvalue[0]);
+//                printf("\r\n");
+//                printf("%d",ADCvalue[i]);
+//                printf("\r\n");
+//            }
+//                printf("\r\nADC[%d] : %d\r\n ",i,ADCvalue[i]);
+//        printf("====================================\r\n");
+#endif // PYJ.2019.07.29_END -- 
+        AdcTimerCnt = 0;
+
+    }
+
+    /* USER CODE END WHILE */
+
+    /* USER CODE BEGIN 3 */
+  }
+  /* USER CODE END 3 */
+}
+
+/**
+  * @brief System Clock Configuration
+  * @retval None
+  */
+void SystemClock_Config(void)
+{
+  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+  RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
+
+  /** Initializes the CPU, AHB and APB busses clocks 
+  */
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
+  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+  RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI_DIV2;
+  RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL14;
+  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Initializes the CPU, AHB and APB busses clocks 
+  */
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
+                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
+
+  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC;
+  PeriphClkInit.AdcClockSelection = RCC_ADCPCLK2_DIV4;
+  if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
+  {
+    Error_Handler();
+  }
+}
+
+/**
+  * @brief NVIC Configuration.
+  * @retval None
+  */
+static void MX_NVIC_Init(void)
+{
+  /* USART1_IRQn interrupt configuration */
+  HAL_NVIC_SetPriority(USART1_IRQn, 0, 0);
+  HAL_NVIC_EnableIRQ(USART1_IRQn);
+  /* TIM6_IRQn interrupt configuration */
+  HAL_NVIC_SetPriority(TIM6_IRQn, 0, 0);
+  HAL_NVIC_EnableIRQ(TIM6_IRQn);
+  /* DMA1_Channel1_IRQn interrupt configuration */
+  HAL_NVIC_SetPriority(DMA1_Channel1_IRQn, 0, 0);
+  HAL_NVIC_EnableIRQ(DMA1_Channel1_IRQn);
+  /* DMA1_Channel4_IRQn interrupt configuration */
+  HAL_NVIC_SetPriority(DMA1_Channel4_IRQn, 0, 0);
+  HAL_NVIC_EnableIRQ(DMA1_Channel4_IRQn);
+  /* DMA1_Channel5_IRQn interrupt configuration */
+  HAL_NVIC_SetPriority(DMA1_Channel5_IRQn, 0, 0);
+  HAL_NVIC_EnableIRQ(DMA1_Channel5_IRQn);
+}
+
+/**
+  * @brief ADC1 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_ADC1_Init(void)
+{
+
+  /* USER CODE BEGIN ADC1_Init 0 */
+
+  /* USER CODE END ADC1_Init 0 */
+
+  ADC_ChannelConfTypeDef sConfig = {0};
+
+  /* USER CODE BEGIN ADC1_Init 1 */
+
+  /* USER CODE END ADC1_Init 1 */
+  /** Common config 
+  */
+  hadc1.Instance = ADC1;
+  hadc1.Init.ScanConvMode = ADC_SCAN_ENABLE;
+  hadc1.Init.ContinuousConvMode = ENABLE;
+  hadc1.Init.DiscontinuousConvMode = DISABLE;
+  hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START;
+  hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT;
+  hadc1.Init.NbrOfConversion = 14;
+  if (HAL_ADC_Init(&hadc1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Configure Regular Channel 
+  */
+  sConfig.Channel = ADC_CHANNEL_0;
+  sConfig.Rank = ADC_REGULAR_RANK_1;
+  sConfig.SamplingTime = ADC_SAMPLETIME_55CYCLES_5;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Configure Regular Channel 
+  */
+  sConfig.Channel = ADC_CHANNEL_1;
+  sConfig.Rank = ADC_REGULAR_RANK_2;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Configure Regular Channel 
+  */
+  sConfig.Channel = ADC_CHANNEL_2;
+  sConfig.Rank = ADC_REGULAR_RANK_3;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Configure Regular Channel 
+  */
+  sConfig.Channel = ADC_CHANNEL_3;
+  sConfig.Rank = ADC_REGULAR_RANK_4;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Configure Regular Channel 
+  */
+  sConfig.Channel = ADC_CHANNEL_4;
+  sConfig.Rank = ADC_REGULAR_RANK_5;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Configure Regular Channel 
+  */
+  sConfig.Channel = ADC_CHANNEL_5;
+  sConfig.Rank = ADC_REGULAR_RANK_6;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Configure Regular Channel 
+  */
+  sConfig.Channel = ADC_CHANNEL_6;
+  sConfig.Rank = ADC_REGULAR_RANK_7;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Configure Regular Channel 
+  */
+  sConfig.Channel = ADC_CHANNEL_7;
+  sConfig.Rank = ADC_REGULAR_RANK_8;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Configure Regular Channel 
+  */
+  sConfig.Channel = ADC_CHANNEL_8;
+  sConfig.Rank = ADC_REGULAR_RANK_9;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Configure Regular Channel 
+  */
+  sConfig.Channel = ADC_CHANNEL_9;
+  sConfig.Rank = ADC_REGULAR_RANK_10;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Configure Regular Channel 
+  */
+  sConfig.Channel = ADC_CHANNEL_10;
+  sConfig.Rank = ADC_REGULAR_RANK_11;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Configure Regular Channel 
+  */
+  sConfig.Channel = ADC_CHANNEL_11;
+  sConfig.Rank = ADC_REGULAR_RANK_12;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Configure Regular Channel 
+  */
+  sConfig.Channel = ADC_CHANNEL_12;
+  sConfig.Rank = ADC_REGULAR_RANK_13;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Configure Regular Channel 
+  */
+  sConfig.Channel = ADC_CHANNEL_13;
+  sConfig.Rank = ADC_REGULAR_RANK_14;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN ADC1_Init 2 */
+
+  /* USER CODE END ADC1_Init 2 */
+
+}
+
+/**
+  * @brief TIM6 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_TIM6_Init(void)
+{
+
+  /* USER CODE BEGIN TIM6_Init 0 */
+
+  /* USER CODE END TIM6_Init 0 */
+
+  TIM_MasterConfigTypeDef sMasterConfig = {0};
+
+  /* USER CODE BEGIN TIM6_Init 1 */
+
+  /* USER CODE END TIM6_Init 1 */
+  htim6.Instance = TIM6;
+  htim6.Init.Prescaler = 5600-1;
+  htim6.Init.CounterMode = TIM_COUNTERMODE_UP;
+  htim6.Init.Period = 10;
+  htim6.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+  if (HAL_TIM_Base_Init(&htim6) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
+  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
+  if (HAL_TIMEx_MasterConfigSynchronization(&htim6, &sMasterConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN TIM6_Init 2 */
+
+  /* USER CODE END TIM6_Init 2 */
+
+}
+
+/**
+  * @brief USART1 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_USART1_UART_Init(void)
+{
+
+  /* USER CODE BEGIN USART1_Init 0 */
+
+  /* USER CODE END USART1_Init 0 */
+
+  /* USER CODE BEGIN USART1_Init 1 */
+
+  /* USER CODE END USART1_Init 1 */
+  huart1.Instance = USART1;
+  huart1.Init.BaudRate = 115200;
+  huart1.Init.WordLength = UART_WORDLENGTH_8B;
+  huart1.Init.StopBits = UART_STOPBITS_1;
+  huart1.Init.Parity = UART_PARITY_NONE;
+  huart1.Init.Mode = UART_MODE_TX_RX;
+  huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+  huart1.Init.OverSampling = UART_OVERSAMPLING_16;
+  if (HAL_UART_Init(&huart1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN USART1_Init 2 */
+
+  /* USER CODE END USART1_Init 2 */
+
+}
+
+/** 
+  * Enable DMA controller clock
+  */
+static void MX_DMA_Init(void) 
+{
+  /* DMA controller clock enable */
+  __HAL_RCC_DMA1_CLK_ENABLE();
+
+}
+
+/**
+  * @brief GPIO Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_GPIO_Init(void)
+{
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+
+  /* GPIO Ports Clock Enable */
+  __HAL_RCC_GPIOE_CLK_ENABLE();
+  __HAL_RCC_GPIOC_CLK_ENABLE();
+  __HAL_RCC_GPIOF_CLK_ENABLE();
+  __HAL_RCC_GPIOA_CLK_ENABLE();
+  __HAL_RCC_GPIOB_CLK_ENABLE();
+  __HAL_RCC_GPIOD_CLK_ENABLE();
+  __HAL_RCC_GPIOG_CLK_ENABLE();
+
+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(GPIOE, ATT_EN_1_8G_DL1_Pin|ATT_EN_1_8G_DL2_Pin|ATT_EN_1_8G_UL1_Pin|ATT_EN_1_8G_UL2_Pin 
+                          |ATT_EN_1_8G_UL3_Pin|PATH_EN_2_1G_DL_Pin|PATH_EN_2_1G_UL_Pin, GPIO_PIN_RESET);
+
+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(GPIOC, ATT_EN_1_8G_UL4_Pin|PATH_EN_1_8G_DL_Pin|PATH_EN_1_8G_UL_Pin|PLL_EN_3_5G_L_Pin 
+                          |PLL_EN_3_5G_H_Pin|PLL_ON_OFF_3_5G_L_Pin|PLL_DATA_3_5G_Pin|PLL_ON_OFF_3_5G_H_Pin, GPIO_PIN_RESET);
+
+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(GPIOF, PLL_EN_1_8G_DL_Pin|PLL_EN_1_8G_UL_Pin|ATT_EN_2_1G_DL1_Pin|ATT_EN_2_1G_DL2_Pin 
+                          |ATT_EN_2_1G_UL1_Pin|ATT_EN_2_1G_UL2_Pin|ATT_EN_2_1G_UL3_Pin|ATT_EN_2_1G_UL4_Pin, GPIO_PIN_RESET);
+
+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(GPIOD, PLL_DATA_Pin|PLL_CLK_Pin|ATT_DATA_Pin|ATT_CLK_Pin 
+                          |DA_LDAC_Pin|ATT_CLK_3_5G_Pin|ATT_EN_3_5G_Pin|ATT_DATA_3_5G_DL_Pin 
+                          |ATT_DATA_3_5G_UL_Pin|ATT_DATA_3_5G_COM1_Pin|ATT_DATA_3_5G_COM2_Pin|ATT_DATA_3_5G_COM3_Pin 
+                          |PATH_EN_3_5G_L_Pin, GPIO_PIN_RESET);
+
+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(GPIOG, DA_SYNC_Pin|DA_SCLK_Pin|DA_DIN_Pin|_T_SYNC_UL_Pin 
+                          |T_SYNC_UL_Pin|_T_SYNC_DL_Pin|T_SYNC_DL_Pin|PATH_EN_3_5G_H_Pin 
+                          |PATH_EN_3_5G_DL_Pin|PATH_EN_3_5G_UL_Pin|PLL_ON_OFF_3_5G_LG12_Pin|PLL_ON_OFF_3_5G_HG13_Pin 
+                          |BOOT_LED_Pin, GPIO_PIN_RESET);
+
+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(PLL_CLK_3_5G_GPIO_Port, PLL_CLK_3_5G_Pin, GPIO_PIN_RESET);
+
+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(GPIOB, PLL_EN_2_1G_DL_Pin|PLL_EN_2_1G_UL_Pin, GPIO_PIN_RESET);
+
+  /*Configure GPIO pins : ATT_EN_1_8G_DL1_Pin ATT_EN_1_8G_DL2_Pin ATT_EN_1_8G_UL1_Pin ATT_EN_1_8G_UL2_Pin 
+                           ATT_EN_1_8G_UL3_Pin PATH_EN_2_1G_DL_Pin PATH_EN_2_1G_UL_Pin */
+  GPIO_InitStruct.Pin = ATT_EN_1_8G_DL1_Pin|ATT_EN_1_8G_DL2_Pin|ATT_EN_1_8G_UL1_Pin|ATT_EN_1_8G_UL2_Pin 
+                          |ATT_EN_1_8G_UL3_Pin|PATH_EN_2_1G_DL_Pin|PATH_EN_2_1G_UL_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+  HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
+
+  /*Configure GPIO pins : ATT_EN_1_8G_UL4_Pin PATH_EN_1_8G_DL_Pin PATH_EN_1_8G_UL_Pin PLL_EN_3_5G_L_Pin 
+                           PLL_EN_3_5G_H_Pin PLL_ON_OFF_3_5G_L_Pin PLL_DATA_3_5G_Pin PLL_ON_OFF_3_5G_H_Pin */
+  GPIO_InitStruct.Pin = ATT_EN_1_8G_UL4_Pin|PATH_EN_1_8G_DL_Pin|PATH_EN_1_8G_UL_Pin|PLL_EN_3_5G_L_Pin 
+                          |PLL_EN_3_5G_H_Pin|PLL_ON_OFF_3_5G_L_Pin|PLL_DATA_3_5G_Pin|PLL_ON_OFF_3_5G_H_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+  HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+
+  /*Configure GPIO pins : PLL_EN_1_8G_DL_Pin PLL_EN_1_8G_UL_Pin ATT_EN_2_1G_DL1_Pin ATT_EN_2_1G_DL2_Pin 
+                           ATT_EN_2_1G_UL1_Pin ATT_EN_2_1G_UL2_Pin ATT_EN_2_1G_UL3_Pin ATT_EN_2_1G_UL4_Pin */
+  GPIO_InitStruct.Pin = PLL_EN_1_8G_DL_Pin|PLL_EN_1_8G_UL_Pin|ATT_EN_2_1G_DL1_Pin|ATT_EN_2_1G_DL2_Pin 
+                          |ATT_EN_2_1G_UL1_Pin|ATT_EN_2_1G_UL2_Pin|ATT_EN_2_1G_UL3_Pin|ATT_EN_2_1G_UL4_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+  HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
+
+  /*Configure GPIO pins : PLL_LD_1_8G_DL_Pin PLL_LD_1_8G_UL_Pin */
+  GPIO_InitStruct.Pin = PLL_LD_1_8G_DL_Pin|PLL_LD_1_8G_UL_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
+
+  /*Configure GPIO pins : PLL_DATA_Pin PLL_CLK_Pin ATT_DATA_Pin ATT_CLK_Pin 
+                           DA_LDAC_Pin ATT_CLK_3_5G_Pin ATT_EN_3_5G_Pin ATT_DATA_3_5G_DL_Pin 
+                           ATT_DATA_3_5G_UL_Pin ATT_DATA_3_5G_COM1_Pin ATT_DATA_3_5G_COM2_Pin ATT_DATA_3_5G_COM3_Pin 
+                           PATH_EN_3_5G_L_Pin */
+  GPIO_InitStruct.Pin = PLL_DATA_Pin|PLL_CLK_Pin|ATT_DATA_Pin|ATT_CLK_Pin 
+                          |DA_LDAC_Pin|ATT_CLK_3_5G_Pin|ATT_EN_3_5G_Pin|ATT_DATA_3_5G_DL_Pin 
+                          |ATT_DATA_3_5G_UL_Pin|ATT_DATA_3_5G_COM1_Pin|ATT_DATA_3_5G_COM2_Pin|ATT_DATA_3_5G_COM3_Pin 
+                          |PATH_EN_3_5G_L_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+  HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
+
+  /*Configure GPIO pins : ALARM_DC_Pin ALARM_AC_Pin */
+  GPIO_InitStruct.Pin = ALARM_DC_Pin|ALARM_AC_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
+
+  /*Configure GPIO pins : DA_SYNC_Pin DA_SCLK_Pin DA_DIN_Pin _T_SYNC_UL_Pin 
+                           T_SYNC_UL_Pin _T_SYNC_DL_Pin T_SYNC_DL_Pin PATH_EN_3_5G_H_Pin 
+                           PATH_EN_3_5G_DL_Pin PATH_EN_3_5G_UL_Pin PLL_ON_OFF_3_5G_LG12_Pin PLL_ON_OFF_3_5G_HG13_Pin 
+                           BOOT_LED_Pin */
+  GPIO_InitStruct.Pin = DA_SYNC_Pin|DA_SCLK_Pin|DA_DIN_Pin|_T_SYNC_UL_Pin 
+                          |T_SYNC_UL_Pin|_T_SYNC_DL_Pin|T_SYNC_DL_Pin|PATH_EN_3_5G_H_Pin 
+                          |PATH_EN_3_5G_DL_Pin|PATH_EN_3_5G_UL_Pin|PLL_ON_OFF_3_5G_LG12_Pin|PLL_ON_OFF_3_5G_HG13_Pin 
+                          |BOOT_LED_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+  HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
+
+  /*Configure GPIO pins : PLL_LD_3_5G_L_Pin PLL_LD_3_5G_H_Pin */
+  GPIO_InitStruct.Pin = PLL_LD_3_5G_L_Pin|PLL_LD_3_5G_H_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+
+  /*Configure GPIO pin : PLL_CLK_3_5G_Pin */
+  GPIO_InitStruct.Pin = PLL_CLK_3_5G_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+  HAL_GPIO_Init(PLL_CLK_3_5G_GPIO_Port, &GPIO_InitStruct);
+
+  /*Configure GPIO pins : PLL_EN_2_1G_DL_Pin PLL_EN_2_1G_UL_Pin */
+  GPIO_InitStruct.Pin = PLL_EN_2_1G_DL_Pin|PLL_EN_2_1G_UL_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+  /*Configure GPIO pins : PLL_LD_2_1G_DL_Pin PLL_LD_2_1G_UL_Pin */
+  GPIO_InitStruct.Pin = PLL_LD_2_1G_DL_Pin|PLL_LD_2_1G_UL_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+}
+
+/* USER CODE BEGIN 4 */
+
+/* USER CODE END 4 */
+
+/**
+  * @brief  This function is executed in case of error occurrence.
+  * @retval None
+  */
+void Error_Handler(void)
+{
+  /* USER CODE BEGIN Error_Handler_Debug */
+  /* User can add his own implementation to report the HAL error return state */
+
+  /* USER CODE END Error_Handler_Debug */
+}
+
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  Reports the name of the source file and the source line number
+  *         where the assert_param error has occurred.
+  * @param  file: pointer to the source file name
+  * @param  line: assert_param error line source number
+  * @retval None
+  */
+void assert_failed(uint8_t *file, uint32_t line)
+{ 
+  /* USER CODE BEGIN 6 */
+  /* User can add his own implementation to report the file name and line number,
+     tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+  /* USER CODE END 6 */
+}
+#endif /* USE_FULL_ASSERT */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

insight/STM32F103_ATTEN_PLL_Zig.si4project/Backup/main(7098).c

@@ -0,0 +1,753 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : main.c
+  * @brief          : Main program body
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN PTD */
+
+/* USER CODE END PTD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+ADC_HandleTypeDef hadc1;
+DMA_HandleTypeDef hdma_adc1;
+
+TIM_HandleTypeDef htim6;
+
+UART_HandleTypeDef huart1;
+DMA_HandleTypeDef hdma_usart1_rx;
+DMA_HandleTypeDef hdma_usart1_tx;
+
+/* USER CODE BEGIN PV */
+volatile uint32_t AdcTimerCnt = 0;
+volatile uint32_t LedTimerCnt = 0;
+volatile uint32_t UartRxTimerCnt = 0;
+extern PLL_Setting_st Pll_3_5_H;
+extern PLL_Setting_st Pll_3_5_L;
+
+//volatile uint32_t UartTxTimerCnt = 0;
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+void SystemClock_Config(void);
+static void MX_GPIO_Init(void);
+static void MX_DMA_Init(void);
+static void MX_ADC1_Init(void);
+static void MX_USART1_UART_Init(void);
+static void MX_TIM6_Init(void);
+static void MX_NVIC_Init(void);
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+uint32_t ADCvalue[ADC_EA];
+
+#if 1 // PYJ.2019.07.26_BEGIN --
+
+void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
+{
+    if(htim->Instance == TIM6){
+        UartRxTimerCnt++;
+        LedTimerCnt++;
+        AdcTimerCnt++;
+    }
+} 
+#endif // PYJ.2019.07.26_END -- 
+int _write (int file, uint8_t *ptr, uint16_t len)
+{
+    HAL_UART_Transmit(&huart1, ptr, len,10);
+//    HAL_UART_Transmit_IT(&huart1, ptr, len);
+    return len;
+}
+void Pol_Delay_us(volatile uint32_t microseconds)
+{
+  /* Go to number of cycles for system */
+  microseconds *= (SystemCoreClock / 1000000);
+ 
+  /* Delay till end */
+  while (microseconds--);
+}
+/* define address bits for addressing dac outputs. */
+#define SPI_DAC_ADDR0  (1 << 12)
+#define SPI_DAC_ADDR1  (1 << 13)
+#define SPI_DAC_ADDR2  (1 << 14)
+
+/* define addresses for each dac output. */
+#define SPI_DAC_OUTPUT_A   0x00
+#define SPI_DAC_OUTPUT_B   SPI_DAC_ADDR0
+#define SPI_DAC_OUTPUT_C   SPI_DAC_ADDR1
+#define SPI_DAC_OUTPUT_D  (SPI_DAC_ADDR1 | SPI_DAC_ADDR0)
+#define SPI_DAC_OUTPUT_E   SPI_DAC_ADDR2
+#define SPI_DAC_OUTPUT_F  (SPI_DAC_ADDR2 | SPI_DAC_ADDR0)
+#define SPI_DAC_OUTPUT_G  (SPI_DAC_ADDR2 | SPI_DAC_ADDR1)
+#define SPI_DAC_OUTPUT_H  (SPI_DAC_ADDR2 | SPI_DAC_ADDR1 | SPI_DAC_ADDR0)
+
+
+/* USER CODE END 0 */
+
+/**
+  * @brief  The application entry point.
+  * @retval int
+  */
+int main(void)
+{
+  /* USER CODE BEGIN 1 */
+
+  /* USER CODE END 1 */
+  
+
+  /* MCU Configuration--------------------------------------------------------*/
+
+  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
+  HAL_Init();
+
+  /* USER CODE BEGIN Init */
+
+  /* USER CODE END Init */
+
+  /* Configure the system clock */
+  SystemClock_Config();
+
+  /* USER CODE BEGIN SysInit */
+
+  /* USER CODE END SysInit */
+
+  /* Initialize all configured peripherals */
+  MX_GPIO_Init();
+  MX_DMA_Init();
+  MX_ADC1_Init();
+  MX_USART1_UART_Init();
+  MX_TIM6_Init();
+
+  /* Initialize interrupts */
+  MX_NVIC_Init();
+  /* USER CODE BEGIN 2 */
+  setbuf(stdout, NULL);
+#ifdef DEBUG_PRINT
+  printf("UART Start \r\n");
+#endif /* DEBUG_PRINT */
+    HAL_UART_Receive_DMA(&huart1, TerminalQueue.Buffer, 1);
+    PE43711_PinInit();
+    /* * * PATH PLL ON OFF SECTION* * */
+    HAL_GPIO_WritePin(PATH_EN_1_8G_DL_GPIO_Port,PATH_EN_1_8G_DL_Pin, GPIO_PIN_RESET);
+    HAL_GPIO_WritePin(PATH_EN_1_8G_UL_GPIO_Port,PATH_EN_1_8G_UL_Pin, GPIO_PIN_RESET);
+    HAL_GPIO_WritePin(PATH_EN_2_1G_DL_GPIO_Port,PATH_EN_2_1G_DL_Pin, GPIO_PIN_RESET);
+    HAL_GPIO_WritePin(PATH_EN_2_1G_UL_GPIO_Port,PATH_EN_2_1G_UL_Pin, GPIO_PIN_RESET);
+    HAL_GPIO_WritePin(PATH_EN_3_5G_DL_GPIO_Port,PATH_EN_3_5G_DL_Pin, GPIO_PIN_RESET);
+    HAL_GPIO_WritePin(PATH_EN_3_5G_UL_GPIO_Port,PATH_EN_3_5G_UL_Pin, GPIO_PIN_RESET);
+    HAL_GPIO_WritePin(PATH_EN_3_5G_H_GPIO_Port,PATH_EN_3_5G_H_Pin, GPIO_PIN_RESET);
+    HAL_GPIO_WritePin(PATH_EN_3_5G_L_GPIO_Port,PATH_EN_3_5G_L_Pin, GPIO_PIN_RESET);
+
+    HAL_GPIO_WritePin(PLL_ON_OFF_3_5G_H_GPIO_Port,PLL_ON_OFF_3_5G_H_Pin, GPIO_PIN_SET);
+    HAL_GPIO_WritePin(PLL_ON_OFF_3_5G_L_GPIO_Port,PLL_ON_OFF_3_5G_L_Pin, GPIO_PIN_SET);  
+    
+    HAL_GPIO_WritePin(_T_SYNC_UL_GPIO_Port,_T_SYNC_UL_Pin, GPIO_PIN_RESET);
+    HAL_GPIO_WritePin(T_SYNC_UL_GPIO_Port,T_SYNC_UL_Pin, GPIO_PIN_RESET);
+    HAL_GPIO_WritePin(_T_SYNC_DL_GPIO_Port,_T_SYNC_DL_Pin, GPIO_PIN_SET);
+    HAL_GPIO_WritePin(T_SYNC_DL_GPIO_Port,T_SYNC_DL_Pin, GPIO_PIN_SET);     
+    
+    HAL_Delay(1);
+    Path_Init();
+    
+    ADF4153_Init();
+    SubmitDAC(0x800C);
+    SubmitDAC(0xA000);
+//    HAL_Delay(1);
+#if 1
+// PYJ.2019.07.30_BEGIN -- 
+    SubmitDAC(0x0FFF);
+    SubmitDAC(0x13FF);
+    SubmitDAC(0x24FF);
+    SubmitDAC(0x35FF);
+    SubmitDAC(0x46FF);
+    SubmitDAC(0x57FF);
+    SubmitDAC(0x68FF);
+    SubmitDAC(0x79FF);
+#endif // PYJ.2019.07.30_END -- 
+        
+//    ad53_write(0x2BFF);
+
+#ifdef DEBUG_PRINT
+  printf("\r\nPLL_EN_3_5G_L_GPIO_Port\r\n");
+#endif /* DEBUG_PRINT */
+  
+#ifdef DEBUG_PRINT
+  printf("\r\nPLL_EN_2_1G_UL_GPIO_Port\r\n");
+#endif /* DEBUG_PRINT */
+  HAL_Delay(1);
+  ADF4113_Initialize();
+//  BDA4601_Test();
+
+  while(!(HAL_ADCEx_Calibration_Start(&hadc1)==HAL_OK));
+//    HAL_ADCEx_Calibration_Start(&hadc1);
+    ADF4153_R_N_Reg_st temp_reg;
+    Bluecell_Flash_Read(&Flash_Save_data[INDEX_BLUE_HEADER]);
+    ATTEN_PLL_PATH_Initialize();
+
+//  ADF_Module_Ctrl(Pll_test,0x324000,0x144051,0x0017c2,0x0003c7);
+    HAL_ADC_Start_DMA(&hadc1, (uint32_t*)ADCvalue, 14);
+
+  /* USER CODE END 2 */
+
+  /* Infinite loop */
+  /* USER CODE BEGIN WHILE */
+//  while(HAL_ADCEx_Calibration_Start(&hadc1) != HAL_OK); //ADC Calibration 
+//   HAL_ADC_Start_DMA(&hadc1, (uint32_t*)ADCvalue, ADC_EA);
+ 
+  while (1)
+  {
+    if(HAL_GPIO_ReadPin(PLL_LD_3_5G_H_GPIO_Port, PLL_LD_3_5G_H_Pin) == GPIO_PIN_RESET 
+        && HAL_GPIO_ReadPin(PLL_ON_OFF_3_5G_H_GPIO_Port, PLL_ON_OFF_3_5G_H_Pin) == GPIO_PIN_SET){
+        temp_reg = ADF4153_Freq_Calc(3934500000,ADF4153_REFIN,ADF4153_RCOUNTER,ADF4153_CHANNEL_SPACING);
+        ADF4153_Module_Ctrl(Pll_3_5_H,temp_reg.N_reg,temp_reg.R_reg,0x13c2,0x3);
+        HAL_Delay(1);
+    }
+    if(HAL_GPIO_ReadPin(PLL_LD_3_5G_L_GPIO_Port, PLL_LD_3_5G_L_Pin) == GPIO_PIN_RESET
+        || HAL_GPIO_ReadPin(PLL_ON_OFF_3_5G_L_GPIO_Port, PLL_ON_OFF_3_5G_L_Pin) == GPIO_PIN_SET){
+        temp_reg = ADF4153_Freq_Calc(3465500000,ADF4153_REFIN,ADF4153_RCOUNTER,ADF4153_CHANNEL_SPACING);
+        ADF4153_Module_Ctrl(Pll_3_5_L,temp_reg.N_reg,temp_reg.R_reg,0x13c2,0x3);
+        HAL_Delay(1);
+    }
+    if(LedTimerCnt > 500){HAL_GPIO_TogglePin(BOOT_LED_GPIO_Port,GPIO_PIN_14);LedTimerCnt = 0;}
+    while (TerminalQueue.data > 0 && UartRxTimerCnt > 100) GetDataFromUartQueue(&hTerminal);
+    if(AdcTimerCnt > 2500){
+        
+        for(uint8_t i = 0; i< ADC_EA; i += 2 ){
+            Prev_data[INDEX_DET_1_8G_DL_IN_H + i]     = (uint16_t)((ADCvalue[i] & 0xFF00) >> 8);
+            Prev_data[INDEX_DET_1_8G_DL_IN_L + i]     = (uint16_t)(ADCvalue[i] & 0x00FF);
+//            printf("Prev_data[%d] : %x",i,Prev_data[INDEX_DET_1_8G_DL_IN_H + i]);
+//            printf("%x\r\n",i,Prev_data[INDEX_DET_1_8G_DL_IN_L + i]);            
+        }
+//        for(int i = 0; i < 14; i++)
+//            printf("\r\nYJ[%d] : %x \r\n",i,ADCvalue[i]);
+//        HAL_Delay(3000);
+#if 1 // PYJ.2019.07.29_BEGIN -- 
+        printf("====================================\r\n");
+//            for(uint8_t i = 0; i< ADC_EA; i++){
+                printf("%x",ADCvalue[4]);
+                printf("\r\n");
+                printf("%d",ADCvalue[4]);
+                printf("\r\n");
+//            }
+//                printf("\r\nADC[%d] : %d\r\n ",i,ADCvalue[i]);
+        printf("====================================\r\n");
+#endif // PYJ.2019.07.29_END -- 
+        AdcTimerCnt = 0;
+
+    }
+
+    /* USER CODE END WHILE */
+
+    /* USER CODE BEGIN 3 */
+  }
+  /* USER CODE END 3 */
+}
+
+/**
+  * @brief System Clock Configuration
+  * @retval None
+  */
+void SystemClock_Config(void)
+{
+  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+  RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
+
+  /** Initializes the CPU, AHB and APB busses clocks 
+  */
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
+  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+  RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI_DIV2;
+  RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL14;
+  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Initializes the CPU, AHB and APB busses clocks 
+  */
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
+                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
+
+  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC;
+  PeriphClkInit.AdcClockSelection = RCC_ADCPCLK2_DIV4;
+  if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
+  {
+    Error_Handler();
+  }
+}
+
+/**
+  * @brief NVIC Configuration.
+  * @retval None
+  */
+static void MX_NVIC_Init(void)
+{
+  /* USART1_IRQn interrupt configuration */
+  HAL_NVIC_SetPriority(USART1_IRQn, 0, 0);
+  HAL_NVIC_EnableIRQ(USART1_IRQn);
+  /* TIM6_IRQn interrupt configuration */
+  HAL_NVIC_SetPriority(TIM6_IRQn, 0, 0);
+  HAL_NVIC_EnableIRQ(TIM6_IRQn);
+  /* DMA1_Channel1_IRQn interrupt configuration */
+  HAL_NVIC_SetPriority(DMA1_Channel1_IRQn, 0, 0);
+  HAL_NVIC_EnableIRQ(DMA1_Channel1_IRQn);
+  /* DMA1_Channel4_IRQn interrupt configuration */
+  HAL_NVIC_SetPriority(DMA1_Channel4_IRQn, 0, 0);
+  HAL_NVIC_EnableIRQ(DMA1_Channel4_IRQn);
+  /* DMA1_Channel5_IRQn interrupt configuration */
+  HAL_NVIC_SetPriority(DMA1_Channel5_IRQn, 0, 0);
+  HAL_NVIC_EnableIRQ(DMA1_Channel5_IRQn);
+}
+
+/**
+  * @brief ADC1 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_ADC1_Init(void)
+{
+
+  /* USER CODE BEGIN ADC1_Init 0 */
+
+  /* USER CODE END ADC1_Init 0 */
+
+  ADC_ChannelConfTypeDef sConfig = {0};
+
+  /* USER CODE BEGIN ADC1_Init 1 */
+
+  /* USER CODE END ADC1_Init 1 */
+  /** Common config 
+  */
+  hadc1.Instance = ADC1;
+  hadc1.Init.ScanConvMode = ADC_SCAN_ENABLE;
+  hadc1.Init.ContinuousConvMode = ENABLE;
+  hadc1.Init.DiscontinuousConvMode = DISABLE;
+  hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START;
+  hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT;
+  hadc1.Init.NbrOfConversion = 14;
+  if (HAL_ADC_Init(&hadc1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Configure Regular Channel 
+  */
+  sConfig.Channel = ADC_CHANNEL_0;
+  sConfig.Rank = ADC_REGULAR_RANK_1;
+  sConfig.SamplingTime = ADC_SAMPLETIME_239CYCLES_5;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Configure Regular Channel 
+  */
+  sConfig.Channel = ADC_CHANNEL_1;
+  sConfig.Rank = ADC_REGULAR_RANK_2;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Configure Regular Channel 
+  */
+  sConfig.Channel = ADC_CHANNEL_2;
+  sConfig.Rank = ADC_REGULAR_RANK_3;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Configure Regular Channel 
+  */
+  sConfig.Channel = ADC_CHANNEL_3;
+  sConfig.Rank = ADC_REGULAR_RANK_4;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Configure Regular Channel 
+  */
+  sConfig.Channel = ADC_CHANNEL_4;
+  sConfig.Rank = ADC_REGULAR_RANK_5;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Configure Regular Channel 
+  */
+  sConfig.Channel = ADC_CHANNEL_5;
+  sConfig.Rank = ADC_REGULAR_RANK_6;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Configure Regular Channel 
+  */
+  sConfig.Channel = ADC_CHANNEL_6;
+  sConfig.Rank = ADC_REGULAR_RANK_7;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Configure Regular Channel 
+  */
+  sConfig.Channel = ADC_CHANNEL_7;
+  sConfig.Rank = ADC_REGULAR_RANK_8;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Configure Regular Channel 
+  */
+  sConfig.Channel = ADC_CHANNEL_8;
+  sConfig.Rank = ADC_REGULAR_RANK_9;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Configure Regular Channel 
+  */
+  sConfig.Channel = ADC_CHANNEL_9;
+  sConfig.Rank = ADC_REGULAR_RANK_10;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Configure Regular Channel 
+  */
+  sConfig.Channel = ADC_CHANNEL_10;
+  sConfig.Rank = ADC_REGULAR_RANK_11;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Configure Regular Channel 
+  */
+  sConfig.Channel = ADC_CHANNEL_11;
+  sConfig.Rank = ADC_REGULAR_RANK_12;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Configure Regular Channel 
+  */
+  sConfig.Channel = ADC_CHANNEL_12;
+  sConfig.Rank = ADC_REGULAR_RANK_13;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Configure Regular Channel 
+  */
+  sConfig.Channel = ADC_CHANNEL_13;
+  sConfig.Rank = ADC_REGULAR_RANK_14;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN ADC1_Init 2 */
+
+  /* USER CODE END ADC1_Init 2 */
+
+}
+
+/**
+  * @brief TIM6 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_TIM6_Init(void)
+{
+
+  /* USER CODE BEGIN TIM6_Init 0 */
+
+  /* USER CODE END TIM6_Init 0 */
+
+  TIM_MasterConfigTypeDef sMasterConfig = {0};
+
+  /* USER CODE BEGIN TIM6_Init 1 */
+
+  /* USER CODE END TIM6_Init 1 */
+  htim6.Instance = TIM6;
+  htim6.Init.Prescaler = 5600-1;
+  htim6.Init.CounterMode = TIM_COUNTERMODE_UP;
+  htim6.Init.Period = 10;
+  htim6.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+  if (HAL_TIM_Base_Init(&htim6) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
+  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
+  if (HAL_TIMEx_MasterConfigSynchronization(&htim6, &sMasterConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN TIM6_Init 2 */
+
+  /* USER CODE END TIM6_Init 2 */
+
+}
+
+/**
+  * @brief USART1 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_USART1_UART_Init(void)
+{
+
+  /* USER CODE BEGIN USART1_Init 0 */
+
+  /* USER CODE END USART1_Init 0 */
+
+  /* USER CODE BEGIN USART1_Init 1 */
+
+  /* USER CODE END USART1_Init 1 */
+  huart1.Instance = USART1;
+  huart1.Init.BaudRate = 115200;
+  huart1.Init.WordLength = UART_WORDLENGTH_8B;
+  huart1.Init.StopBits = UART_STOPBITS_1;
+  huart1.Init.Parity = UART_PARITY_NONE;
+  huart1.Init.Mode = UART_MODE_TX_RX;
+  huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+  huart1.Init.OverSampling = UART_OVERSAMPLING_16;
+  if (HAL_UART_Init(&huart1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN USART1_Init 2 */
+
+  /* USER CODE END USART1_Init 2 */
+
+}
+
+/** 
+  * Enable DMA controller clock
+  */
+static void MX_DMA_Init(void) 
+{
+  /* DMA controller clock enable */
+  __HAL_RCC_DMA1_CLK_ENABLE();
+
+}
+
+/**
+  * @brief GPIO Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_GPIO_Init(void)
+{
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+
+  /* GPIO Ports Clock Enable */
+  __HAL_RCC_GPIOE_CLK_ENABLE();
+  __HAL_RCC_GPIOC_CLK_ENABLE();
+  __HAL_RCC_GPIOF_CLK_ENABLE();
+  __HAL_RCC_GPIOA_CLK_ENABLE();
+  __HAL_RCC_GPIOB_CLK_ENABLE();
+  __HAL_RCC_GPIOD_CLK_ENABLE();
+  __HAL_RCC_GPIOG_CLK_ENABLE();
+
+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(GPIOE, ATT_EN_1_8G_DL1_Pin|ATT_EN_1_8G_DL2_Pin|ATT_EN_1_8G_UL1_Pin|ATT_EN_1_8G_UL2_Pin 
+                          |ATT_EN_1_8G_UL3_Pin|PATH_EN_2_1G_DL_Pin|PATH_EN_2_1G_UL_Pin, GPIO_PIN_RESET);
+
+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(GPIOC, ATT_EN_1_8G_UL4_Pin|PATH_EN_1_8G_DL_Pin|PATH_EN_1_8G_UL_Pin|PLL_EN_3_5G_L_Pin 
+                          |PLL_EN_3_5G_H_Pin|PLL_ON_OFF_3_5G_L_Pin|PLL_DATA_3_5G_Pin|PLL_ON_OFF_3_5G_H_Pin, GPIO_PIN_RESET);
+
+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(GPIOF, PLL_EN_1_8G_DL_Pin|PLL_EN_1_8G_UL_Pin|ATT_EN_2_1G_DL1_Pin|ATT_EN_2_1G_DL2_Pin 
+                          |ATT_EN_2_1G_UL1_Pin|ATT_EN_2_1G_UL2_Pin|ATT_EN_2_1G_UL3_Pin|ATT_EN_2_1G_UL4_Pin, GPIO_PIN_RESET);
+
+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(GPIOD, PLL_DATA_Pin|PLL_CLK_Pin|ATT_DATA_Pin|ATT_CLK_Pin 
+                          |DA_LDAC_Pin|ATT_CLK_3_5G_Pin|ATT_EN_3_5G_Pin|ATT_DATA_3_5G_DL_Pin 
+                          |ATT_DATA_3_5G_UL_Pin|ATT_DATA_3_5G_COM1_Pin|ATT_DATA_3_5G_COM2_Pin|ATT_DATA_3_5G_COM3_Pin 
+                          |PATH_EN_3_5G_L_Pin, GPIO_PIN_RESET);
+
+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(GPIOG, DA_SYNC_Pin|DA_SCLK_Pin|DA_DIN_Pin|_T_SYNC_UL_Pin 
+                          |T_SYNC_UL_Pin|_T_SYNC_DL_Pin|T_SYNC_DL_Pin|PATH_EN_3_5G_H_Pin 
+                          |PATH_EN_3_5G_DL_Pin|PATH_EN_3_5G_UL_Pin|PLL_ON_OFF_3_5G_LG12_Pin|PLL_ON_OFF_3_5G_HG13_Pin 
+                          |BOOT_LED_Pin, GPIO_PIN_RESET);
+
+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(PLL_CLK_3_5G_GPIO_Port, PLL_CLK_3_5G_Pin, GPIO_PIN_RESET);
+
+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(GPIOB, PLL_EN_2_1G_DL_Pin|PLL_EN_2_1G_UL_Pin, GPIO_PIN_RESET);
+
+  /*Configure GPIO pins : ATT_EN_1_8G_DL1_Pin ATT_EN_1_8G_DL2_Pin ATT_EN_1_8G_UL1_Pin ATT_EN_1_8G_UL2_Pin 
+                           ATT_EN_1_8G_UL3_Pin PATH_EN_2_1G_DL_Pin PATH_EN_2_1G_UL_Pin */
+  GPIO_InitStruct.Pin = ATT_EN_1_8G_DL1_Pin|ATT_EN_1_8G_DL2_Pin|ATT_EN_1_8G_UL1_Pin|ATT_EN_1_8G_UL2_Pin 
+                          |ATT_EN_1_8G_UL3_Pin|PATH_EN_2_1G_DL_Pin|PATH_EN_2_1G_UL_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+  HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
+
+  /*Configure GPIO pins : ATT_EN_1_8G_UL4_Pin PATH_EN_1_8G_DL_Pin PATH_EN_1_8G_UL_Pin PLL_EN_3_5G_L_Pin 
+                           PLL_EN_3_5G_H_Pin PLL_ON_OFF_3_5G_L_Pin PLL_DATA_3_5G_Pin PLL_ON_OFF_3_5G_H_Pin */
+  GPIO_InitStruct.Pin = ATT_EN_1_8G_UL4_Pin|PATH_EN_1_8G_DL_Pin|PATH_EN_1_8G_UL_Pin|PLL_EN_3_5G_L_Pin 
+                          |PLL_EN_3_5G_H_Pin|PLL_ON_OFF_3_5G_L_Pin|PLL_DATA_3_5G_Pin|PLL_ON_OFF_3_5G_H_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+  HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+
+  /*Configure GPIO pins : PLL_EN_1_8G_DL_Pin PLL_EN_1_8G_UL_Pin ATT_EN_2_1G_DL1_Pin ATT_EN_2_1G_DL2_Pin 
+                           ATT_EN_2_1G_UL1_Pin ATT_EN_2_1G_UL2_Pin ATT_EN_2_1G_UL3_Pin ATT_EN_2_1G_UL4_Pin */
+  GPIO_InitStruct.Pin = PLL_EN_1_8G_DL_Pin|PLL_EN_1_8G_UL_Pin|ATT_EN_2_1G_DL1_Pin|ATT_EN_2_1G_DL2_Pin 
+                          |ATT_EN_2_1G_UL1_Pin|ATT_EN_2_1G_UL2_Pin|ATT_EN_2_1G_UL3_Pin|ATT_EN_2_1G_UL4_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+  HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
+
+  /*Configure GPIO pins : PLL_LD_1_8G_DL_Pin PLL_LD_1_8G_UL_Pin */
+  GPIO_InitStruct.Pin = PLL_LD_1_8G_DL_Pin|PLL_LD_1_8G_UL_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
+
+  /*Configure GPIO pins : PLL_DATA_Pin PLL_CLK_Pin ATT_DATA_Pin ATT_CLK_Pin 
+                           DA_LDAC_Pin ATT_CLK_3_5G_Pin ATT_EN_3_5G_Pin ATT_DATA_3_5G_DL_Pin 
+                           ATT_DATA_3_5G_UL_Pin ATT_DATA_3_5G_COM1_Pin ATT_DATA_3_5G_COM2_Pin ATT_DATA_3_5G_COM3_Pin 
+                           PATH_EN_3_5G_L_Pin */
+  GPIO_InitStruct.Pin = PLL_DATA_Pin|PLL_CLK_Pin|ATT_DATA_Pin|ATT_CLK_Pin 
+                          |DA_LDAC_Pin|ATT_CLK_3_5G_Pin|ATT_EN_3_5G_Pin|ATT_DATA_3_5G_DL_Pin 
+                          |ATT_DATA_3_5G_UL_Pin|ATT_DATA_3_5G_COM1_Pin|ATT_DATA_3_5G_COM2_Pin|ATT_DATA_3_5G_COM3_Pin 
+                          |PATH_EN_3_5G_L_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+  HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
+
+  /*Configure GPIO pins : ALARM_DC_Pin ALARM_AC_Pin */
+  GPIO_InitStruct.Pin = ALARM_DC_Pin|ALARM_AC_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
+
+  /*Configure GPIO pins : DA_SYNC_Pin DA_SCLK_Pin DA_DIN_Pin _T_SYNC_UL_Pin 
+                           T_SYNC_UL_Pin _T_SYNC_DL_Pin T_SYNC_DL_Pin PATH_EN_3_5G_H_Pin 
+                           PATH_EN_3_5G_DL_Pin PATH_EN_3_5G_UL_Pin PLL_ON_OFF_3_5G_LG12_Pin PLL_ON_OFF_3_5G_HG13_Pin 
+                           BOOT_LED_Pin */
+  GPIO_InitStruct.Pin = DA_SYNC_Pin|DA_SCLK_Pin|DA_DIN_Pin|_T_SYNC_UL_Pin 
+                          |T_SYNC_UL_Pin|_T_SYNC_DL_Pin|T_SYNC_DL_Pin|PATH_EN_3_5G_H_Pin 
+                          |PATH_EN_3_5G_DL_Pin|PATH_EN_3_5G_UL_Pin|PLL_ON_OFF_3_5G_LG12_Pin|PLL_ON_OFF_3_5G_HG13_Pin 
+                          |BOOT_LED_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+  HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
+
+  /*Configure GPIO pins : PLL_LD_3_5G_L_Pin PLL_LD_3_5G_H_Pin */
+  GPIO_InitStruct.Pin = PLL_LD_3_5G_L_Pin|PLL_LD_3_5G_H_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+
+  /*Configure GPIO pin : PLL_CLK_3_5G_Pin */
+  GPIO_InitStruct.Pin = PLL_CLK_3_5G_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+  HAL_GPIO_Init(PLL_CLK_3_5G_GPIO_Port, &GPIO_InitStruct);
+
+  /*Configure GPIO pins : PLL_EN_2_1G_DL_Pin PLL_EN_2_1G_UL_Pin */
+  GPIO_InitStruct.Pin = PLL_EN_2_1G_DL_Pin|PLL_EN_2_1G_UL_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+  /*Configure GPIO pins : PLL_LD_2_1G_DL_Pin PLL_LD_2_1G_UL_Pin */
+  GPIO_InitStruct.Pin = PLL_LD_2_1G_DL_Pin|PLL_LD_2_1G_UL_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+}
+
+/* USER CODE BEGIN 4 */
+
+/* USER CODE END 4 */
+
+/**
+  * @brief  This function is executed in case of error occurrence.
+  * @retval None
+  */
+void Error_Handler(void)
+{
+  /* USER CODE BEGIN Error_Handler_Debug */
+  /* User can add his own implementation to report the HAL error return state */
+
+  /* USER CODE END Error_Handler_Debug */
+}
+
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  Reports the name of the source file and the source line number
+  *         where the assert_param error has occurred.
+  * @param  file: pointer to the source file name
+  * @param  line: assert_param error line source number
+  * @retval None
+  */
+void assert_failed(uint8_t *file, uint32_t line)
+{ 
+  /* USER CODE BEGIN 6 */
+  /* User can add his own implementation to report the file name and line number,
+     tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+  /* USER CODE END 6 */
+}
+#endif /* USE_FULL_ASSERT */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/