Status Request 구조체 추가

Bluecell_Inc/Bluecell_operate.h

@@ -57,7 +57,7 @@ typedef enum{
 
 	TableDataReq = 40,
 
-};
+}MBICBootProt_st;
 
 typedef enum{
 	MBIC_PREAMBLE_0 = 0,
@@ -86,7 +86,7 @@ typedef enum{
 	/*
 	 * PayLoadSTART
 	 */
-};
+}MBICProt_st;
 
 typedef enum{
 	Alarm_Bit_List = 0xE000,
@@ -341,6 +341,7 @@ enum DATATYPE
 	ATT_UL4_PATH_ON = 0x47,
 	ATT_SelfTest4_OFF = 0x48,
 	ATT_SelfTest4_ON = 0x49,
+	Bluecell_StatusReq = 0x77,
 };
 
 
@@ -442,5 +443,64 @@ typedef struct{
   uint16_t m24_dBm;
   uint16_t m25_dBm;
 }DET_DL;
+typedef struct{
+    uint8_t bluecell_header;
+    uint8_t bluecell_type;
+    uint8_t bluecell_length;    
+    uint8_t bluecell_crcindex;        
+    uint8_t Selftest0;
+    uint8_t Selftest1;
+    uint8_t Selftest2;
+    uint8_t Selftest3;    
+    uint8_t ATT_DL1_PATH;    
+    uint8_t ATT_DL2_PATH;    
+    uint8_t ATT_DL3_PATH;    
+    uint8_t ATT_DL4_PATH;        
+    uint8_t ATT_UL1_PATH;        
+    uint8_t ATT_UL2_PATH;        
+    uint8_t ATT_UL3_PATH;        
+    uint8_t ATT_UL4_PATH;
+    uint8_t ATT_DL1_H;    
+    uint8_t ATT_DL1_L;        
+    uint8_t ATT_DL2_H;    
+    uint8_t ATT_DL2_L;        
+    uint8_t ATT_DL3_H;    
+    uint8_t ATT_DL3_L;        
+    uint8_t ATT_DL4_H;    
+    uint8_t ATT_DL4_L;        
+    uint8_t ATT_UL1_H;    
+    uint8_t ATT_UL1_L;        
+    uint8_t ATT_UL2_H;    
+    uint8_t ATT_UL2_L;        
+    uint8_t ATT_UL3_H;    
+    uint8_t ATT_UL3_L;        
+    uint8_t ATT_UL4_H;
+    uint8_t ATT_UL4_L;
+    uint8_t DET_DL1_IN_H;
+    uint8_t DET_DL1_IN_L;    
+    uint8_t DET_DL2_IN_H;
+    uint8_t DET_DL2_IN_L;    
+    uint8_t DET_DL3_IN_H;
+    uint8_t DET_DL3_IN_L;    
+    uint8_t DET_DL4_IN_H;
+    uint8_t DET_DL4_IN_L;    
+    uint8_t DET_UL1_IN_H;
+    uint8_t DET_UL1_IN_L;    
+    uint8_t DET_UL2_IN_H;
+    uint8_t DET_UL2_IN_L;    
+    uint8_t DET_UL3_IN_H;
+    uint8_t DET_UL3_IN_L;    
+    uint8_t DET_UL4_IN_H;
+    uint8_t DET_UL4_IN_L;        
+    uint8_t DET_TEMP_H;            
+    uint8_t DET_TEMP_L;                
+    uint8_t ATT_AGC_ONOFF;
+    uint8_t ATT_ALC_ONOFF;
+    uint8_t ATT_AGC_H;
+    uint8_t ATT_AGC_L;    
+    uint8_t ATT_ALC_H;
+    uint8_t ATT_ALC_L;    
+    uint8_t bluecell_crc;        
+}BLUESTATUS_st;
 
 #endif /* BLUECELL_OPERATE_H_ */

Bluecell_Src/Bluecell_operate.c

@@ -3,7 +3,8 @@
 #include "Bluecell_operate.h"
 #include "PE43711.h"
 extern volatile uint32_t LedTimerCnt;
-
+extern void PE43711_atten_ctrl(PE43711_st ATT ,uint8_t data);
+extern void Uart1_Data_Send(uint8_t* data,uint8_t size);
 uint8_t Alarm_Status[MAX_ALARM_Len] = {0,};
 //uint8_t data123[10000];
 DET_UL DET_UL1;
@@ -14,7 +15,6 @@ DET_DL DET_DL1;
 DET_DL DET_DL2;
 DET_DL DET_DL3;
 DET_DL DET_DL4;
-
 uint8_t ResultData[1024] = {0,};
 void Boot_LED_Toggle(void){
   if(LedTimerCnt > 500){
@@ -51,25 +51,19 @@ uint8_t* MBIC_HeaderDataSetting(uint8_t* data){
 
 	return ResultData;
 }
-typedef enum{
-  BLUECELL_DL_PATH1 = 0x01,
-  BLUECELL_UL_PATH1,
-  BLUECELL_DL_PATH2,
-  BLUECELL_UL_PATH2,
-  BLUECELL_DL_PATH3,
-  BLUECELL_UL_PATH3,
-  BLUECELL_DL_PATH4,
-  BLUECELL_UL_PATH4,
-};
+
 typedef enum{
 BLUECELL_HEADER,
 BLUECELL_TYPE,
 BLUECELL_LENGTH,
 BLUECELL_CRCINDEX,
 BLUECELL_DATA,
-};
+}BLUECELLProt_st;
 
 extern ALL_PE43711_st ALL_ATT;
+BLUESTATUS_st bluecell_datastatus;
+
+
 bool Bluecell_Operate(uint8_t* data){
   uint8_t datatype = data[BLUECELL_TYPE];
   uint16_t tmp_h = 0,tmp_l = 0;
@@ -85,13 +79,14 @@ bool Bluecell_Operate(uint8_t* data){
 		ret /= 100;
         val = PE43711_DataToHexConvert(ret);
         PE43711_atten_ctrl(ALL_ATT.ATT_DL1,val);
-        
 		printf("ret : %f ,tmp %f \r\n",ret,tmp );
 		break;
 	case ATT_DL1_PATH_OFF 		 :
+        HAL_GPIO_WritePin(PATH_EN_DL1_GPIO_Port,PATH_EN_DL1_Pin,GPIO_PIN_SET);//CLOCK
 		printf("Function : %s Line %d \r\n",__func__,__LINE__);
 		break;
 	case ATT_DL1_PATH_ON 		 :
+        HAL_GPIO_WritePin(PATH_EN_DL1_GPIO_Port,PATH_EN_DL1_Pin,GPIO_PIN_RESET);//CLOCK        
 		printf("Function : %s Line %d \r\n",__func__,__LINE__);
 		break;
 	case ATTUL1  				 :
@@ -108,9 +103,11 @@ bool Bluecell_Operate(uint8_t* data){
 
 		break;
 	case ATT_UL1_PATH_OFF        :
+        HAL_GPIO_WritePin(PATH_EN_UL1_GPIO_Port,PATH_EN_UL1_Pin,GPIO_PIN_SET);//CLOCK
 		printf("Function : %s Line %d \r\n",__func__,__LINE__);
 		break;
 	case ATT_UL1_PATH_ON 		 :
+        HAL_GPIO_WritePin(PATH_EN_UL1_GPIO_Port,PATH_EN_UL1_Pin,GPIO_PIN_RESET);//CLOCK
 		printf("Function : %s Line %d \r\n",__func__,__LINE__);
 		break;
 	case ATT_SelfTest1_OFF		 :
@@ -137,9 +134,11 @@ bool Bluecell_Operate(uint8_t* data){
 
 		break;
 	case ATT_DL2_PATH_OFF		 :
+        HAL_GPIO_WritePin(PATH_EN_DL2_GPIO_Port,PATH_EN_DL2_Pin,GPIO_PIN_SET);//CLOCK
 		printf("Function : %s Line %d \r\n",__func__,__LINE__);
 		break;
 	case ATT_DL2_PATH_ON		 :
+        HAL_GPIO_WritePin(PATH_EN_DL2_GPIO_Port,PATH_EN_DL2_Pin,GPIO_PIN_RESET);//CLOCK
 		printf("Function : %s Line %d \r\n",__func__,__LINE__);
 		break;
 	case ATTUL2  				 :
@@ -156,9 +155,11 @@ bool Bluecell_Operate(uint8_t* data){
 
 		break;
 	case ATT_UL2_PATH_OFF 		 :
+        HAL_GPIO_WritePin(PATH_EN_UL2_GPIO_Port,PATH_EN_UL2_Pin,GPIO_PIN_SET);//CLOCK
 		printf("Function : %s Line %d \r\n",__func__,__LINE__);
 		break;
 	case ATT_UL2_PATH_ON		 :
+        HAL_GPIO_WritePin(PATH_EN_UL2_GPIO_Port,PATH_EN_UL2_Pin,GPIO_PIN_RESET);//CLOCK
 		printf("Function : %s Line %d \r\n",__func__,__LINE__);
 		break;
 	case ATT_SelfTest2_OFF		 :
@@ -186,9 +187,11 @@ bool Bluecell_Operate(uint8_t* data){
 
 		break;
 	case ATT_DL3_PATH_OFF :
+        HAL_GPIO_WritePin(PATH_EN_DL3_GPIO_Port,PATH_EN_DL3_Pin,GPIO_PIN_SET);//CLOCK
 		printf("Function : %s Line %d \r\n",__func__,__LINE__);
 		break;
 	case ATT_DL3_PATH_ON :
+        HAL_GPIO_WritePin(PATH_EN_DL3_GPIO_Port,PATH_EN_DL3_Pin,GPIO_PIN_RESET);//CLOCK
 		printf("Function : %s Line %d \r\n",__func__,__LINE__);
 		break;
 	case ATTUL3  :
@@ -205,9 +208,11 @@ bool Bluecell_Operate(uint8_t* data){
 
 		break;
 	case ATT_UL3_PATH_OFF :
+        HAL_GPIO_WritePin(PATH_EN_UL3_GPIO_Port,PATH_EN_UL3_Pin,GPIO_PIN_SET);//CLOCK
 		printf("Function : %s Line %d \r\n",__func__,__LINE__);
 		break;
 	case ATT_UL3_PATH_ON :
+        HAL_GPIO_WritePin(PATH_EN_UL3_GPIO_Port,PATH_EN_UL3_Pin,GPIO_PIN_RESET);//CLOCK
 		printf("Function : %s Line %d \r\n",__func__,__LINE__);
 		break;
 	case ATT_SelfTest3_OFF :
@@ -236,14 +241,11 @@ bool Bluecell_Operate(uint8_t* data){
 
 		break;
 	case ATT_DL4_PATH_OFF :
-        HAL_GPIO_WritePin(_PATH_SW4_GPIO_Port,_PATH_SW4_Pin,GPIO_PIN_RESET);//CLOCK
-        HAL_GPIO_WritePin(PATH_SW4_GPIO_Port,PATH_SW4_Pin,GPIO_PIN_SET);//CLOCK
+        HAL_GPIO_WritePin(PATH_EN_DL4_GPIO_Port,PATH_EN_DL4_Pin,GPIO_PIN_SET);//CLOCK        
 		printf("Function : %s Line %d \r\n",__func__,__LINE__);
 		break;
 	case ATT_DL4_PATH_ON :
-        HAL_GPIO_WritePin(_PATH_SW4_GPIO_Port,_PATH_SW4_Pin,GPIO_PIN_SET);//CLOCK
-        HAL_GPIO_WritePin(PATH_SW4_GPIO_Port,PATH_SW4_Pin,GPIO_PIN_RESET);//CLOCK
-        
+        HAL_GPIO_WritePin(PATH_EN_DL4_GPIO_Port,PATH_EN_DL4_Pin,GPIO_PIN_RESET);//CLOCK
 		printf("Function : %s Line %d \r\n",__func__,__LINE__);
 		break;
 	case ATTUL4  :
@@ -260,20 +262,89 @@ bool Bluecell_Operate(uint8_t* data){
 
 		break;
 	case ATT_UL4_PATH_OFF:
+        HAL_GPIO_WritePin(PATH_EN_UL4_GPIO_Port,PATH_EN_UL4_Pin,GPIO_PIN_SET);//CLOCK
 		printf("Function : %s Line %d \r\n",__func__,__LINE__);
 		break;
 	case ATT_UL4_PATH_ON :
+        HAL_GPIO_WritePin(PATH_EN_UL4_GPIO_Port,PATH_EN_UL4_Pin,GPIO_PIN_RESET);//CLOCK
 		printf("Function : %s Line %d \r\n",__func__,__LINE__);
 		break;
 	case ATT_SelfTest4_OFF :
+        HAL_GPIO_WritePin(_PATH_SW4_GPIO_Port,_PATH_SW4_Pin,GPIO_PIN_RESET);//CLOCK
+        HAL_GPIO_WritePin(PATH_SW4_GPIO_Port,PATH_SW4_Pin,GPIO_PIN_SET);//CLOCK
 		printf("Function : %s Line %d \r\n",__func__,__LINE__);
 		break;
 	case ATT_SelfTest4_ON :
+        HAL_GPIO_WritePin(_PATH_SW4_GPIO_Port,_PATH_SW4_Pin,GPIO_PIN_SET);//CLOCK
+        HAL_GPIO_WritePin(PATH_SW4_GPIO_Port,PATH_SW4_Pin,GPIO_PIN_RESET);//CLOCK
 		printf("Function : %s Line %d \r\n",__func__,__LINE__);
 		break;
+    case Bluecell_StatusReq:
+        DataStatusGet();
+        Uart1_Data_Send(&bluecell_datastatus, sizeof(bluecell_datastatus));
+        break;
   }
   return true;
 }
+void DataStatusGet(void){
+        bluecell_datastatus.bluecell_header = 0xbe;
+        bluecell_datastatus.bluecell_type = Bluecell_StatusReq;
+        bluecell_datastatus.bluecell_length = sizeof(bluecell_datastatus) - 1;    
+        bluecell_datastatus.bluecell_crcindex = 56;
+        bluecell_datastatus.Selftest0 = HAL_GPIO_ReadPin(_PATH_SW1_GPIO_Port,_PATH_SW1_Pin);
+        bluecell_datastatus.Selftest1 = HAL_GPIO_ReadPin(_PATH_SW2_GPIO_Port,_PATH_SW2_Pin);
+        bluecell_datastatus.Selftest2 = HAL_GPIO_ReadPin(_PATH_SW3_GPIO_Port,_PATH_SW3_Pin);
+        bluecell_datastatus.Selftest3 = HAL_GPIO_ReadPin(_PATH_SW4_GPIO_Port,_PATH_SW4_Pin);
+        bluecell_datastatus.ATT_DL1_PATH = HAL_GPIO_ReadPin(PATH_EN_DL1_GPIO_Port,PATH_EN_UL1_Pin);//CLOCK;
+        bluecell_datastatus.ATT_DL2_PATH = HAL_GPIO_ReadPin(PATH_EN_DL2_GPIO_Port,PATH_EN_UL2_Pin);//CLOCK;
+        bluecell_datastatus.ATT_DL3_PATH = HAL_GPIO_ReadPin(PATH_EN_DL3_GPIO_Port,PATH_EN_UL3_Pin);//CLOCK;
+        bluecell_datastatus.ATT_DL4_PATH = HAL_GPIO_ReadPin(PATH_EN_DL4_GPIO_Port,PATH_EN_UL4_Pin);//CLOCK;
+        bluecell_datastatus.ATT_UL1_PATH = HAL_GPIO_ReadPin(PATH_EN_UL1_GPIO_Port,PATH_EN_UL1_Pin);//CLOCK;
+        bluecell_datastatus.ATT_UL2_PATH = HAL_GPIO_ReadPin(PATH_EN_UL2_GPIO_Port,PATH_EN_UL2_Pin);//CLOCK;
+        bluecell_datastatus.ATT_UL3_PATH = HAL_GPIO_ReadPin(PATH_EN_UL3_GPIO_Port,PATH_EN_UL3_Pin);//CLOCK;
+        bluecell_datastatus.ATT_UL4_PATH = HAL_GPIO_ReadPin(PATH_EN_UL4_GPIO_Port,PATH_EN_UL4_Pin);//CLOCK;
+        bluecell_datastatus.ATT_DL1_H ;
+        bluecell_datastatus.ATT_DL1_L;
+        bluecell_datastatus.ATT_DL2_H;
+        bluecell_datastatus.ATT_DL2_L;
+        bluecell_datastatus.ATT_DL3_H;
+        bluecell_datastatus.ATT_DL3_L;
+        bluecell_datastatus.ATT_DL4_H;
+        bluecell_datastatus.ATT_DL4_L;
+        bluecell_datastatus.ATT_UL1_H;
+        bluecell_datastatus.ATT_UL1_L;
+        bluecell_datastatus.ATT_UL2_H;
+        bluecell_datastatus.ATT_UL2_L;
+        bluecell_datastatus.ATT_UL3_H;
+        bluecell_datastatus.ATT_UL3_L;
+        bluecell_datastatus.ATT_UL4_H;
+        bluecell_datastatus.ATT_UL4_L;
+        bluecell_datastatus.DET_DL1_IN_H;
+        bluecell_datastatus.DET_DL1_IN_L;
+        bluecell_datastatus.DET_DL2_IN_H;
+        bluecell_datastatus.DET_DL2_IN_L;
+        bluecell_datastatus.DET_DL3_IN_H;
+        bluecell_datastatus.DET_DL3_IN_L;
+        bluecell_datastatus.DET_DL4_IN_H;
+        bluecell_datastatus.DET_DL4_IN_L;
+        bluecell_datastatus.DET_UL1_IN_H;
+        bluecell_datastatus.DET_UL1_IN_L;
+        bluecell_datastatus.DET_UL2_IN_H;
+        bluecell_datastatus.DET_UL2_IN_L;
+        bluecell_datastatus.DET_UL3_IN_H;
+        bluecell_datastatus.DET_UL3_IN_L;
+        bluecell_datastatus.DET_UL4_IN_H;
+        bluecell_datastatus.DET_UL4_IN_L;
+        bluecell_datastatus.DET_TEMP_H;
+        bluecell_datastatus.DET_TEMP_L;
+        bluecell_datastatus.ATT_AGC_ONOFF;
+        bluecell_datastatus.ATT_ALC_ONOFF;
+        bluecell_datastatus.ATT_AGC_H;
+        bluecell_datastatus.ATT_AGC_L;
+        bluecell_datastatus.ATT_ALC_H;
+        bluecell_datastatus.ATT_ALC_L;
+}
+
 bool MBIC_Operate(uint8_t* data){
 	uint16_t datatype = 0;
 

Bluecell_Src/uart.c

@@ -9,12 +9,15 @@
 #include "uart.h"
 
 #include "string.h"
+#include "Bluecell_operate.h"
+
+
 
 UARTQUEUE TerminalQueue;
 UARTQUEUE WifiQueue;
 uart_hal_tx_type uart_hal_tx;
 extern volatile uint32_t UartRxTimerCnt;
-
+extern bool Bluecell_Operate(uint8_t* data);
 void InitUartQueue(pUARTQUEUE pQueue)
 {
   setbuf(stdout, NULL);