Temperature Offset 주는 함수 생성

규격을 넘는 값이 생성 되었을 경우 Max치 Min값으로 적용

Bluecell_Inc/Bluecell_operate.h

@@ -798,7 +798,7 @@ typedef struct{
     uint8_t ATT_UL2_PATH;
     uint8_t ATT_UL3_PATH;
     uint8_t ATT_UL4_PATH;
-    uint8_t ATT_DL1_H;
+    uint8_t ATT_DL1_H;/*Real Level*/
     uint8_t ATT_DL1_L;
     uint8_t ATT_DL2_H;
     uint8_t ATT_DL2_L;
@@ -814,7 +814,7 @@ typedef struct{
     uint8_t ATT_UL3_L;
     uint8_t ATT_UL4_H;
     uint8_t ATT_UL4_L;
-    uint8_t ULO_P1_Level1_H;
+    uint8_t ULO_P1_Level1_H;/*ADC Value*/
     uint8_t ULO_P1_Level1_L;
     uint8_t ULO_P2_Level2_H;
     uint8_t ULO_P2_Level2_L;

Bluecell_Src/Bluecell_operate.c

@@ -113,6 +113,8 @@ void TimeSetting(uint8_t* data);
 void Temp_Shutdown_ONOFF(uint8_t val);
 
 void UL_Path_OnOff(uint8_t Index,uint8_t value,uint8_t* path,uint8_t* PrevAtten,uint8_t* retrycnt,uint8_t* PrevRetryCnt);
+int16_t Temperature_Offset_Get(int8_t* Temp_Table,int8_t CurrTemp);
+
 /***************************************************************************************/
 /*                                  Valuable                                           */
 /***************************************************************************************/
@@ -4832,9 +4834,9 @@ void Carrier_ONOFF(uint8_t val){
     }
 }
 void Temp_Shutdown_ONOFF(uint8_t val){
-    printf("val :%d \r\n",val);
-    printf("Path_TempShutdown_Set : %d \r\n",bluecell_Currdatastatus.Path_TempShutdown_Set);    
-    printf(" bluecell_Currdatastatus.Path_TempSave_Bit : %x \r\n", bluecell_Currdatastatus.Path_TempSave_Bit);
+//    printf("val :%d \r\n",val);
+//    printf("Path_TempShutdown_Set : %d \r\n",bluecell_Currdatastatus.Path_TempShutdown_Set);    
+//    printf(" bluecell_Currdatastatus.Path_TempSave_Bit : %x \r\n", bluecell_Currdatastatus.Path_TempSave_Bit);
     if(val == 1){// ON //Path ON
 #if 0 // PYJ.2020.08.14_BEGIN -- 
          bluecell_Currdatastatus.ATT_DL1_PATH= TempShutdown_DL_SaveData[0];    
@@ -4885,7 +4887,7 @@ void Temp_Shutdown_ONOFF(uint8_t val){
             bluecell_Currdatastatus.ATT_UL4_PATH = true;
         else
             bluecell_Currdatastatus.ATT_UL4_PATH = false;
-          printf("Path ON \r\n");
+//          printf("Path ON \r\n");
 
     }
     else{// OFF
@@ -4910,7 +4912,7 @@ void Temp_Shutdown_ONOFF(uint8_t val){
         bluecell_Currdatastatus.ATT_UL2_PATH = false;    
         bluecell_Currdatastatus.ATT_UL3_PATH = false;    
         bluecell_Currdatastatus.ATT_UL4_PATH = false;   
-        printf("Path OOF \r\n");
+//        printf("Path OFF \r\n");
         bluecell_Currdatastatus.ALARM_TEMP_HIGH = 0;
         bluecell_Currdatastatus.ALARM_DLI_Level = 0;
         bluecell_Currdatastatus.ALARM_DLI_SHTUTDOWN = 0;
@@ -5373,10 +5375,10 @@ bool MBIC_Operate(uint8_t* data){
                 break;
             case Temp_Shutdown_Path_ON_OFF:
                 bluecell_Currdatastatus.Path_TempShutdown_Set = data[MBIC_PAYLOADSTART + 3];
-                printf("bluecell_Currdatastatus.Path_TempShutdown_Set : %d \r\n",bluecell_Currdatastatus.Path_TempShutdown_Set);
+//                printf("bluecell_Currdatastatus.Path_TempShutdown_Set : %d \r\n",bluecell_Currdatastatus.Path_TempShutdown_Set);
                 Temp_Shutdown_ONOFF(bluecell_Currdatastatus.Path_TempShutdown_Set);
-                printf("bluecell_Currdatastatus.Path_TempShutdown_Set : %d \r\n",bluecell_Currdatastatus.Path_TempShutdown_Set);                
-                printf(" bluecell_Currdatastatus.ATT_DL1_PATH : %d \r\n", bluecell_Currdatastatus.ATT_DL1_PATH);
+//                printf("bluecell_Currdatastatus.Path_TempShutdown_Set : %d \r\n",bluecell_Currdatastatus.Path_TempShutdown_Set);                
+//                printf(" bluecell_Currdatastatus.ATT_DL1_PATH : %d \r\n", bluecell_Currdatastatus.ATT_DL1_PATH);
                 break;
             case  Carrier_ON_OFF                          :
                 bluecell_Currdatastatus.Carrier_ON_OFF = data[MBIC_PAYLOADSTART + 3]; 
@@ -8156,7 +8158,12 @@ int16_t ResultData = 0;
     //ret 현재 Voltage 값 출력
     //ret 에 따른 현재 DBM 구현
     ResdBm = HFR_CntUpCalc(ResdBm);
+    ResdBm += Temperature_Offset_Get(&Temp_UL1.Table_1_Temp,bluecell_Currdatastatus.DET_TEMP);
     ResultData = ResdBm;// + bluecell_Currdatastatus.UL_Det_Path_Offset[TableIndex];
+    if(ResultData < -60)
+        ResultData = -60;
+    else if(ResultData > -15)
+        ResultData = -15;    
 //    printf("HFR CALC RET : %d \r\n",ResultData);
     ULO_Level[ULO_ALC_H] = (ResultData & 0xFF00) >> 8;
     ULO_Level[ULO_ALC_L] = (ResultData & 0x00FF);  
@@ -8412,6 +8419,32 @@ void AGC_Package_Operate(uint8_t* Threshold,uint8_t* DL_MainAtten,uint8_t Tablei
 
 }
 #endif // PYJ.2020.06.27_END -- 
+
+/*
+
+bluecell_Currdatastatus.DET_TEMP
+
+*/
+int16_t Temperature_Offset_Get(int8_t* Temp_Table,int8_t CurrTemp){
+    int8_t Ref_Temperature = -10;
+    int16_t Curr_Level_Offset_ret = 0;
+    uint8_t index = 0;
+    for(int i = Ref_Temperature; i < 60; i += 5){
+//            printf("about Temp : %d \r\n",i);
+        if(CurrTemp >= i && CurrTemp < i + 5){
+//            printf("Origin Temp : %d    Aboud Temp : %d,index : %d \r\n",CurrTemp,i,index);
+            Curr_Level_Offset_ret = (int8_t)(Temp_Table[index]/ 4);// (Temp_Table[(index  * 2)] << 8 | Temp_Table[(index  * 2) + 1]) / 4;
+        }
+        index++;
+    }
+//    printf("Curr_Level_Offset_ret : %x \r\n",Curr_Level_Offset_ret);
+    return Curr_Level_Offset_ret;
+//    printf("Curr Temperature : %d \r\n",CurrTemp);    
+//    printf(",Temp_Table[0] : %x \r\n",Temp_Table[0]);
+//    printf(",Temp_Table[1] : %x \r\n",Temp_Table[1]);        
+//    printf("Temp Table : %x \r\n",Temp_Table[0] << 8 | Temp_Table[1]);
+
+}
 typedef enum{
     DL_Level_H,
     DL_Level_L,        
@@ -8426,7 +8459,13 @@ void DL_Det_Function(uint8_t Table_Num,uint8_t* CurrADC_Level,DET_TABLEDL_st* DL
     Levelret = (int16_t)Bluecell_TestPro(AGC_AutoControl_ADC_Compare(ret,&DL_Table->Table_Det5_dBm_H,DL_Table->Table_Length,AGC_Table));
 //    Levelret += bluecell_Currdatastatus.DL_Det_ALL_Offset;
 
+    Levelret += Temperature_Offset_Get(&Temp_DL1.Table_1_Temp,bluecell_Currdatastatus.DET_TEMP);
+    if(Levelret < -25)
+        Levelret = -25;
+    else if(Levelret > 7)
+        Levelret = 7;
 //    printf("Levelret %d : %d \r\n",Table_Num + 1,Levelret);
+
     Level[DL_Level_H] = (Levelret & 0xFF00) >> 8;
     Level[DL_Level_L] = (Levelret & 0x00FF);
     
@@ -8449,8 +8488,6 @@ void AGC_Function(){//DL
     };
          
     if(AGCTimerCnt > 500){
-        
-
         if(bluecell_Currdatastatus.DLI_AGC_ON_OFF == true){
             
             Limitdata = (( bluecell_Currdatastatus.DLI_AGC_Threshold_H << 8) & 0xFF00) ;