Temperature Shudown 기능 On Off 기능 순서 변경

Bluecell_Src/Bluecell_operate.c

@@ -3697,7 +3697,7 @@ uint32_t MBIC_DataSend(uint8_t* data){
 
 
 
-    /*Temperature_Offset*/
+    /*Temperature_Threshold*/
     data[MBIC_PAYLOADSTART + i++] = MBIC_AID;
     data[MBIC_PAYLOADSTART + i++] = Temp_High_Threshold;
     data[MBIC_PAYLOADSTART + i++] = 1; // LENGTH
@@ -4835,7 +4835,7 @@ void Temp_Shutdown_ONOFF(uint8_t val){
     printf("val :%d \r\n",val);
     printf("Path_TempShutdown_Set : %d \r\n",bluecell_Currdatastatus.Path_TempShutdown_Set);    
     printf(" bluecell_Currdatastatus.Path_TempSave_Bit : %x \r\n", bluecell_Currdatastatus.Path_TempSave_Bit);
-    if(val == 0){// ON //Path ON
+    if(val == 1){// ON //Path ON
 #if 0 // PYJ.2020.08.14_BEGIN -- 
          bluecell_Currdatastatus.ATT_DL1_PATH= TempShutdown_DL_SaveData[0];    
          bluecell_Currdatastatus.ATT_DL2_PATH= TempShutdown_DL_SaveData[1];    
@@ -5300,6 +5300,7 @@ bool MBIC_Operate(uint8_t* data){
                 break;
             case  Alarm_Test_Mode                         :
 //                printf("bluecell_Currdatastatus.ALsARM_TESTMODE : %d \r\n",bluecell_Currdatastatus.ALARM_TESTMODE);
+//                printf("bluecell_Currdatastatus.ALsARM_TESTMODE : %d \r\n",data[MBIC_PAYLOADSTART + 3]);
                 bluecell_Currdatastatus.ALARM_TESTMODE = data[MBIC_PAYLOADSTART + 3]; 
                 break;
             case  Alarm_Test_Dummy                        :
@@ -5308,11 +5309,11 @@ bool MBIC_Operate(uint8_t* data){
                 bluecell_Currdatastatus.ALARM_Test_Dummy3 = data[MBIC_PAYLOADSTART + 5];
                 bluecell_Currdatastatus.ALARM_Test_Dummy4 = data[MBIC_PAYLOADSTART + 6];
                 bluecell_Currdatastatus.ALARM_Test_Dummy5 = data[MBIC_PAYLOADSTART + 7];
-//                printf("Dummy 1 : %d \r\n",bluecell_Currdatastatus.ALARM_Test_Dummy1);
-//                printf("Dummy 2 : %d \r\n",bluecell_Currdatastatus.ALARM_Test_Dummy2);
-//                printf("Dummy 3 : %d \r\n",bluecell_Currdatastatus.ALARM_Test_Dummy3);
-//                printf("Dummy 4 : %d \r\n",bluecell_Currdatastatus.ALARM_Test_Dummy4);
-//                printf("Dummy 5 : %d \r\n",bluecell_Currdatastatus.ALARM_Test_Dummy5);                
+//                printf("Dummy 1 : %x \r\n",bluecell_Currdatastatus.ALARM_Test_Dummy1);
+//                printf("Dummy 2 : %x \r\n",bluecell_Currdatastatus.ALARM_Test_Dummy2);
+//                printf("Dummy 3 : %x \r\n",bluecell_Currdatastatus.ALARM_Test_Dummy3);
+//                printf("Dummy 4 : %x \r\n",bluecell_Currdatastatus.ALARM_Test_Dummy4);
+//                printf("Dummy 5 : %x \r\n",bluecell_Currdatastatus.ALARM_Test_Dummy5);                
                 break;
             case  CPU_Bank_Select_Reboot_by               :
                 bluecell_Currdatastatus.CPU_Bank_Select = data[MBIC_PAYLOADSTART + 3]; 
@@ -5329,11 +5330,12 @@ bool MBIC_Operate(uint8_t* data){
                 EEPROM_M24C08_Read(EEPROM_M24C08_ID,EEPROM_WINDOW_STATUS_ADDRESDS,&bluecell_Currdatastatus.bluecell_header,sizeof(BLUESTATUS_st) );
 //                printf("bluecell_Currdatastatus.CPU_Bank_Select : %d \r\n",bluecell_Currdatastatus.CPU_Bank_Select);
 //                printf("I will Booting Bank : %d \r\n",bluecell_Currdatastatus.CPU_Current_Bank);
+                printf("Reset : \r\n");
                 NVIC_SystemReset();
                 break;
             case  SW_Reset                                :
 //                Table_LengSet();
-//                printf("SoftWare Reset Start \r\n");
+                printf("SoftWare Reset Start \r\n");
                 bluecell_Currdatastatus.S_W_Reset = data[MBIC_PAYLOADSTART + 3]; 
                 NVIC_SystemReset();
                 break;
@@ -5371,7 +5373,10 @@ bool MBIC_Operate(uint8_t* data){
                 break;
             case Temp_Shutdown_Path_ON_OFF:
                 bluecell_Currdatastatus.Path_TempShutdown_Set = data[MBIC_PAYLOADSTART + 3];
+                printf("bluecell_Currdatastatus.Path_TempShutdown_Set : %d \r\n",bluecell_Currdatastatus.Path_TempShutdown_Set);
                 Temp_Shutdown_ONOFF(bluecell_Currdatastatus.Path_TempShutdown_Set);
+                printf("bluecell_Currdatastatus.Path_TempShutdown_Set : %d \r\n",bluecell_Currdatastatus.Path_TempShutdown_Set);                
+                printf(" bluecell_Currdatastatus.ATT_DL1_PATH : %d \r\n", bluecell_Currdatastatus.ATT_DL1_PATH);
                 break;
             case  Carrier_ON_OFF                          :
                 bluecell_Currdatastatus.Carrier_ON_OFF = data[MBIC_PAYLOADSTART + 3];